---------- Original message from Jayesh Vadgama ---------- > Gentlemen, > > I hope one of you could assist. > > My question is, if the factory is approved to build product to directive > 91/263/EEC. What approvals does the factory need to build product for > shipping to the US, or is directive 91/263/EEC accepted by the US. > > Jayesh Vadgama > Hardware Engineer > MSU UK Ltd
Jayesh For FCC certification of terminal equipment you are required to submit a one page summary of your quality assurance program signed by your QA manager. Coupled with this you must also submit a summary of your continuing compliance program in which you declare that you will perform a series of Part 68 tests at least every 6 months while the equipment is still in production. Results of these tests must be kept on file and made available to the FCC on request. (See Appendix G of the FCC Form 730 Application Guide.) Your existing quality system to satisfy 91/263/EEC requirements (or more correctly 98/13/EC) may well be a good basis for your submittal, however you cannot simply declare to the FCC that you have a quality system that satisfies 98/13/EC and expect them to accept this. You've got to play be their rules and send them what they expect to be sent as detailed in the Application Guide. A factory inspection however is generally not required. Hope this helps. Regards ------------------------------ Ben Wrigley Senior Approvals Specialist KTL Saxon Way Priory Park West Hull HU13 9PB UK Phone: +44 (0)1482 801801 Fax: +44 (0)1482 801806 Mobile: +44 (0)802 280914 Web: http://www.ktl.com Email: mailto:[email protected]
