If you've updated your 700p to firmware version 1.10, then it should support all SD and SDHC cards. If you have not and/or your 700p is running something less than 1.10, then only "SD" cards 2GB and lower will be supported. To check your firmware version, enter the Phone app, hit Menu, then Options:Phone Info. Next to Software you should find something that looks like Treo700p-1.xx-NNNN where 1.xx is your firmware version and NNNN is your carrier.
The class (2, 4, and 6) on SDHC cards roughly corresponds to the speed -- bigger numbers = faster cards (in general). I wouldn't recommend a Class 2 card and tend to believe that you get the best results with the fastest card you can afford. But that's me. HTH. - Craig On 9/1/07, Richard Todd Perry <[EMAIL PROTECTED]> wrote: > OK, folks, so I'm a bit confused about memory. Since the prices have > come down so much, I see no reason not to upgrade from my current 1G > card(s) to larger capacity ones. I'm looking at 4G versions now. > > (I use a Treo 700p.) > > Who knew - apparently there's lots of different types of cards on the > market these days! > > I typically use NewEgg for most electronics, and they seem to have SD > cards divided into two camps: > 1) Those that support the newer SDHC (high-capacity) standard, and > 2) Those that don't. > > Also, there's this dicussion of "class" in the features/spec sections. > Appear that the choices here are Class 2, class 4, and class 6. > > I can't seem to find any clear answer in the Palm material as to what > the 700p supports...so I cast this upon the waters. > > Can anyone tell me if the below card would work with a 700p? > > http://www.newegg.com/Product/Product.aspx?Item=N82E16820178150 > > Thanks much! > > Richard T Perry > [EMAIL PROTECTED] > > > > > > > Yahoo! Groups Links > > > > -- http://www.GearBits.com -- Tech. Culture. Ideas. Opinions.
