What happens if you run "ifup eth0" to bring up the eth0 interface "manually"?
--Jeremy On Mon, 2003-01-06 at 23:34, Chris Bullock wrote: > I am tring to set up Internet connection sharing for my > home network. Hardware, Using a Compaq deskpro with dual > nics, one compaq and one smc1211. Have broadband coming > in from my modem to eth0 which is my compaq card. eth1 > (SMC)card is going to a Netgear 4-port 10mb hub which will > hopefully feed my internal machines. I am using Mandrake > 9.0 with all the updates. I have tried this twice on two > different machines with the same result. I goto Mandrake > Control Center and click Internet connection sharing and > go through the steps, download the needed packages and so > on, Configure my eth0 as the Internet interface and my > eth1 as the LAN interface. All seems well until it > finishes configuring. At this point my eth0 (Internet if) > goes down. No light on the card or the modem. service > network start will not bring up external interface. > ifconfig does not show external but does show the > internal. What file(s) does the Internet connection file > use so maybe I can look at to see anything that stands > out? Or can someone help? > > Thanks in advance, > > --Chris > > _______________________________________________ > TriLUG mailing list > http://www.trilug.org/mailman/listinfo/trilug > TriLUG Organizational FAQ: > http://www.trilug.org/~lovelace/faq/TriLUG-faq.html > _______________________________________________ TriLUG mailing list http://www.trilug.org/mailman/listinfo/trilug TriLUG Organizational FAQ: http://www.trilug.org/~lovelace/faq/TriLUG-faq.html
