>There is sound engineering behind the 568B color code for data wiring, and it's usually labeled right there on every jack, patch panel, etc that you're likely to use *snip*
No, the "Powers that Be" did a HORRIBLE job picking the colors for color-coding wire. Why do I say this? I'm COLORBLIND. It's not a bad version of colorblindness; but the "Brown" and the "Green" of cat5 look EXACTLY the same. Same deal with Resistors: Always failed the test in my High School Electronics class, and didn't put 2+2 together until I was at the eye doctor's, and, Voila! I can't see the "7" in the colored dots! :( I never thought of myself as a "Disabled" person, but every time they color code something without taking into consideration that percentage of the male population (which is a significant percentage) that is colorblind, they are in effect making it "inaccessable". My $.02, wab. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Aaron S. Joyner Sent: Tuesday, October 05, 2004 11:45 AM To: Triangle Linux Users Group discussion list Subject: Re: [TriLUG] OT: Home Depot and Cat 5 Steve Litt wrote: >On Tuesday 05 October 2004 09:21 am, Aaron S. Joyner wrote: > > > >>If anyone else has any insights or disagreements, I'd be quite >>interested to hear. I am not an authoritative source on cabling by >>any means, I've just observed the common industry practices for the >>better part of a decade and am kind of a stickler when it comes to proper cabling. >> >>Aaron S. Joyner >> >> > >I have an additional question. I have a 150' cat5 cable hand made by my >vendor. It doesn't work. A friend told me that with long runs there's a >special wiring method than with short runs, in order to limit >capacitance or inductance or some such. > >Anyone know about that? > >One thing I can tell you is that the non-working cable has only 4 >conductors crimped. For long cables, should all 8 be crimped? > The simple reasoning is that (for 10/100 Ethernet) data is carried on pins 1 and 2, and 3 and 6. Pins 1 and 2 are one circuit, pins 3 and 6 are the other. One is used for Transmit, the other for Receive - which one is which of course depends on your perspective, and if you're talking as an end point or a mid point (think device vs switch). The 568B color code ensures that the orange pair (orange, and white with an orange stripe) is used for pins 1 and 2, and the blue pair (blue, and white with a blue stripe) is used for pins 3 and 6. Why is this important, you ask? Well basic electrical engineering will point out that two wires, twisted together, will produce less inductance in other near-by conductors. In other words, you don't get "cross talk" between the wires, and the signal is more clean. That's the reason the wires are twisted so tightly in Cat-V cable, it's to help ensure there's no interference between the two very sensitive "BIG ANTENNAS" you've essentially attached to your Ethernet devices. If you have a look at older Cat-III (Category 3) cable, it's a much looser twist. Take a look at older telephone cable, it's even less twisted, the point of basically not being twisted at all. Which is why cross talk between two lines in the same phone jack used to be really common in the telephone world. :) So please, follow the color code. If you don't understand the engineering behind something, trust that the "code" was designed so that you don't have to, so long as you follow it. Also, note that this is a dramatic over-simplification of the electrical workings of Cat-V cable, if you'd like a more thorough explanation consult google or your local physics / EE professor. Aaron S. Joyner -- TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug TriLUG Organizational FAQ : http://trilug.org/faq/ TriLUG Member Services FAQ : http://members.trilug.org/services_faq/ TriLUG PGP Keyring : http://trilug.org/~chrish/trilug.asc -- TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug TriLUG Organizational FAQ : http://trilug.org/faq/ TriLUG Member Services FAQ : http://members.trilug.org/services_faq/ TriLUG PGP Keyring : http://trilug.org/~chrish/trilug.asc
