I purchased a wireless USB adapter and used it to successfully connect to my
home wireless network in Trisquel. But Abrowser cannot connect to any website
on the internet. Is this a hardware problem or a software problem?
My network adapter is Broadcom 802.11n. Where can I change its settings in
Trisquel?
----------------------
This is the error message from Abrowser.
“Server not found
Abrowser can't find the server at www.trisquel.info.
Check the address for typing errors such as
ww.example.com instead of
www.example.com
If you are unable to load any pages, check your computer's network
connection.
If your computer or network is protected by a firewall or proxy, make sure
that Abrowser is permitted to access the Web.”
-----------------------
These are the details about my wireless network.
SSID: poey
Interface: 802.11 WiFi (wlan0)
Hardware address: 00:08:54:A0:2D:38
Driver: rtl8187
Security: WPA/WPA2
IPv4 settings
IP address: 192.168.1.6
Brodcast Address: 192.168.1.255
Subnett mask255.255.255.0
Default route: 192.168.1.1
Primary DNS: 192.168.1.1
Mode: Infrastructure
BSSID: -
Device MAC address: 00:08:54:A0:2D:38 (wlan0)
MTU: automatic
Method: automatic (DHCP)
DHCP client ID: -
IPV6 settings
Method: automatic
