-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 You might as well need the following packages, with the reason after the colons:
icc-profiles-free: Provides color profiles for use with Scribus. Provides the following profiles: * /usr/share/color/icc/Gray-CIE_L.icc * /usr/share/color/icc/CineonLog_M_Knee_10.icc * /usr/share/color/icc/CineonLog_M.icc * /usr/share/color/icc/Gray.icc * /usr/share/color/icc/FOGRA29L.ti3 * /usr/share/color/icc/sRGB.icc * /usr/share/color/icc/CineonLog_M_Knee_20.icc * /usr/share/color/icc/CineLogCurve.icc * /usr/share/color/icc/FOGRA40L.ti3 * /usr/share/color/icc/LCMSXYZI.ICM * /usr/share/color/icc/compatibleWithAdobeRGB1998.icc * /usr/share/color/icc/ITULab.icc * /usr/share/color/icc/TR003.ti3 * /usr/share/color/icc/CineonLog_M_Knee_30.icc * /usr/share/color/icc/LStar-RGB.icc * /usr/share/color/icc/TR006.ti3 * /usr/share/color/icc/TR005.ti3 * /usr/share/color/icc/FOGRA28L.ti3 * /usr/share/color/icc/FOGRA30L.ti3 * /usr/share/color/icc/FOGRA39L.ti3 * /usr/share/color/icc/LCMSLABI.ICM * /usr/share/color/icc/CineonLog_M_Knee_60.icc * /usr/share/color/icc/TR002.ti3 argyll: Has a command called Colprof, which creates .icc profiles from .ti3 files. Needed because Inkscape reads only .icc files as color files . Note: If you're using Inkscape with color profiles, be aware that: when creating a project with Inkscape, you must link the color profile that you want to use in the project's properties. For example, if you plan to use a CMYK color profile like FOGRA27L (one of the most used CMYK color profiles worldwide) or FOGRA39L (preferred by FOGRA over FOGRA27L), go to the project's properties, and in color management, select the desired profile and link it to the project. Then, for every object in the project, check whether their fill and stroke have color management enabled and set to that color profile (if I'm not mistaken, there must be a tab called "CMS", where you can enable or disable color management for the objects). Be carefully though, I don't know if Inkscape enables color management for objects automatically once a color profile has been linked, so you might as well stay in the safe side and double check. Also, if you want to import .svg images to Scribus, and if these images use a color standard other than RGB, make sure to export then to other image format, preferable a lossless one, and then import these to Scribus. We must also consider the paper weight (grams per square meter of paper ream) of the paper being used. I'm still trying to understand this concept as I'm quite inexperienced in printed graphics design. But I have been told that the paper weight can affect the choice of color profile too. Also, you'll probably come to a dead end in the following situations: * If you don't know which color profile the printer will be using. "CMYK" is not enough, as we have "Pantone", FOGRA27L, FOGRA39L, SWOP v2.0, and so on; * If color profiles fall under functional data according to the free software philosophy (that's quite likely to be the case, as we have a package for this matter, the icc-profiles-free package). AND IF the printer doesn't use one of the profiles from the icc-profiles-free package. In this case, we won't be able to help you much regarding the installation of this non-free functional data, and you'll have to get the color profile either with those responsible for printing, or via any other means. As general tips (from the video linked in the additional references): * When handing the project to those responsible for printing, get then a list of the colors with their CMYK hexadecimal values side-by-side with their HSL values; * Ask if the organization responsible for printing can get you a printed preview, even if you need to pay them to do so; * If they ask for the source files, they'll probably mess up with your work; * I have seem some article saying that PostScript is the "native" format used by printers nowadays. I just can't confirm the reference/source as I don't remember where I have seem it. REFERENCES http://www.color.org/chardata/FOGRA27.xalter http://www.color.org/chardata/FOGRA39.xalter ADDITIONAL REFERENCES https://en.wikipedia.org/wiki/Grammage http://hemingway.softwarelivre.org/fisl16/high/41c/sala_41c-high-2015071 01601.ogv - -- Assinatura automática – português brasileiro: – Página de usuário na wiki do LibrePlanet.org: https://libreplanet.org/wiki/User:Adfeno – Em favor da aprovação da Lei ODF em Santa Catarina (https://secure.avaaz.org/po/petition/Aprovacao_da_Lei_ODF_em_Santa_Cata rina), e para garantir os direitos humanos de igual tratamento pelo governo ou lei, de circulação dentro das fronteiras de cada nação, de participação no governo, e de igualdade no acesso aos serviços públicos, não estou aceitando arquivos do Microsoft Office ou do Apple iWork. Por favor, use o LibreOffice(https://www.libreoffice.org/) e seus formatos do padrão ODF (.odt, .odp, etc.). Automatic signature – North American English: – User page on LibrePlanet.org wiki: https://libreplanet.org/wiki/User:Adfeno – In favor of the approval of the ODF law in Santa Catarina (https://secure.avaaz.org/po/petition/Aprovacao_da_Lei_ODF_em_Santa_Cata rina), and to ensure the human rights of equal treatment by the government or law, of circulation inside the boundaries of each nation, of participation on the government, and of equality on the access to the public services, I'm not accepting Microsoft Office's files or Apple iWork's files. Please use LibreOffice (https://www.libreoffice.org/) and its formats from the ODF standard (.odt, .odp, etc). -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iF4EAREIAAYFAlYSfaEACgkQyNbhUgHunaGQ8gD/Q9kCBGQgp4WItdg3s0cu0vFJ eIo56ayzADW9CdAD/NkA/iEojpTJtzwm7wX9SR2tQIeakKOVS6AKIhnWKOaI04Bm =10vj -----END PGP SIGNATURE-----
