Hi Manuel, This 0x1c error code indicates the TPM selftest failed and has shutdown, according to the spec, you need to reboot the machine. By reboot here I mean a full power cycle, you must shutdown it, and then power it on again. Have you returned from a suspend?
Thanks, Rajiv Andrade Security Development IBM Linux Technology Center On Jul 8, 2010, at 5:40 AM, Manuel Jeckelmann wrote: > Hi everyone, > > I am trying to get started with TPM on my Laptop. Unfortunately there seem to > be some problems and I cannot figure out what they are related to. > > My hardware is an Acer TravelMate 6293 with an Infineon TPM and with BIOS > v1.38. On top of it I use Ubuntu Linux 10.4 (kernel 2.6.23-23). > > Here are the facts: > - When I activated and enabled my TPM in BIOS, it still tells me it is > de-activated the next time I enter BIOS. > - After boot-up the following modules get loaded: tpm_bios, tpm and tpm_tis. > - tpm_tis leaves the following message in my message log (dmesg): "tpm_tis > 00:0d: 1.2 TPM (device-id 0xB, rev-id 16)". > - Meanwhile, in /dev/ I have a device called "tpm0". > - When I try to start "tcsd -f" the following is printed out (I compiled > trousers with debug output activated): > ------- > TCSD tcsd_conf.c:94 platform_class_list_append: platform_class_list_append > start: > TCSD tcsd_conf.c:125 platform_class_list_append: Platform Class Added. > TCSD TCS tcsi_caps_tpm.c:43 Entering Get Cap > TCSD TCS tcs_context.c:186 Success: 30000000 is an Internal Context > To TPM: 00 C1 00 00 00 12 00 00 00 65 00 00 00 1A 00 00 > To TPM: 00 00 > TCSD TDDL tddl.c:171 Calling write to driver > TCSD TDDL tddl.c:188 ioctl: (25) Inappropriate ioctl for device > TCSD TDDL tddl.c:189 Falling back to Read/Write device support. > From TPM: 00 C4 00 00 00 0A 00 00 00 1C > LOG_RETERR TPM tcsi_caps_tpm.c:55: 0x1c > TCSD TCS ERROR: tcs_caps.c:191 TCS GetCapability failed with result = 0x1c > ------- > - It is clear that tpm_version won't work either, since it depends on tcsd. > - (I have exactly the same output when I unload and re-load the tpm_tis > modules with the force=1 and interrupts=0 flags) > > So, if anyone knows what could be the issue I would be very graceful if that > one could share it with me. :) Thanks! > > Best, > -Maennel > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Sprint > What will you do first with EVO, the first 4G phone? > Visit sprint.com/first -- > http://p.sf.net/sfu/sprint-com-first_______________________________________________ > TrouSerS-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/trousers-users ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ TrouSerS-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/trousers-users
