I have had this issue as well. After many
installations it turned to be some hardware
dependancy. On some servers work, on some not. It is
definitely related to grub. Unfortunatelly I haven't
found solution for it. Just used different hardware.

Regards,
Kxt

--- David Strupl <[EMAIL PROTECTED]> wrote:

> Hi,
> 
> I am writing this message after spending approx. 10
> hours installing TSL 
> 3.0 on my computer. I have finaly made it working
> but writing this 
> message in hope that it can help someone.
> 
> I have downloaded and successfully burned the ISO
> image. When installing 
> on a dual core intel pentium d based machine the
> installation went 
> smoothly until I tried to reboot the system after
> install. It did not boot.
> 
> Checking the install logs revealed very strange
> message: something like 
> "no bootloader installed" although I have grub
> selected and configured 
> properly. Further searching the logs revealed that
> the configuration for 
> grub was written later than the attempt to install
> it (by viper).
> 
> The solution:
> 
> 1. I had to run the grub install right after the
> viper finished. I have 
> used the very same command line as viper (I have
> taken it from the viper 
> logs). Just grep for grub in the logs.
> 
> 2. I had to run fdisk and set the bootable flag on
> the partition 
> containing the bootloader as the install did not do
> that for me.
> 
> I had to do both 1. and 2. when the finish screen of
> viper was still 
> visible (from Alt-F2) for the mounts to stay in the
> state where viper 
> was using them - exiting viper unmounts the needed
> mounts. And BTW the 
> logs are at different location than the last screen
> of viper is 
> suggesting (and are non-existant after the reboot
> since they have 
> probably stayed on some temporary fs).
> 
> Hope this can help if someone will get into the same
> trouble as myself.
> 
> Best regards,
> 
> David
> 
> PS.: I apologize for disturbing if this is a known
> problem - but it took 
> me very long time to figure out. I have tried the
> install at least 10 
> times before finding the root of the problem.
> _______________________________________________
> tsl-discuss mailing list
> [email protected]
>
http://lists.trustix.org/mailman/listinfo/tsl-discuss
> 



                
____________________________________________________
Start your day with Yahoo! - make it your home page 
http://www.yahoo.com/r/hs 
 
_______________________________________________
tsl-discuss mailing list
[email protected]
http://lists.trustix.org/mailman/listinfo/tsl-discuss

Reply via email to