Kaliban, Yes, you are correct -- at a very minimum, your system should attempt to boot the CD. Sounds to me like your DL145 is not set to boot a CD rom -- it looks for a bootable hard drive, does not find one, and returns a boot failure message. Sounds simplistic, but have you looked into the bios for configured boot devices?
Cheers, Dominic Kaliban wrote: > On Feb 2, 2006, at 12:17 AM, Morten Albrigtsen wrote: > > >>>We have several HP Proliant DL145s and a DL385. The v2.20 ISO image >>>install cd we made boots up and installs fine in the DL385, but the >>>DL145 gives a 'boot failure' message immediately upon boot attempt. >> >>Have you tried to configure the boot loader manually? > > > I'm not sure if I understand you correctly. If I were to configure > the boot loader manually, wouldn't that be done after the computer > had booted to the install cd? What happens is, as soon as the bios is > finished doing it's thing and is now going to boot from the cd, the > cd light flashes once and the boot failure message appears, and > that's the end of that. If I understand correctly, I'm not even > getting to the boot loader, or rather, I have not been offered the > option of even installing the boot loader. > > Am I incorrect in this? > > Thanks! > > -k > _______________________________________________ > tsl-discuss mailing list > [email protected] > http://lists.trustix.org/mailman/listinfo/tsl-discuss _______________________________________________ tsl-discuss mailing list [email protected] http://lists.trustix.org/mailman/listinfo/tsl-discuss
