I solved the problem and managed to execute initializeDB.py correctly. What helped is to directly call the python interpreter from the command line - "python initializeDB.py". I guess when I was trying to execute just "initializeDB.py" Windows took the "*.py" handler from c: \Python25 even though it wasn't in a system path folder.
My bad that I didn't follow the tutorial to the last letter. However, I guess there are quite many Windows guys that are so much used to the default windows behavior that run only "file.py" even if instructions tell to run "python file.py", especially when instructions are from the linux environment. It might be a good idea to add a note to the tutorial. Something like "Windows folks, be sure to write the 'python' word in the command line. On some machines running just 'initializeDB.py' might call the wrong interpreter copy". Best regards, Artem. On Dec 30, 11:44 pm, Artem Marchenko <[email protected]> wrote: > From the virtualenv's python it looks like both zope and > zope.sqlalchemy are indeed registered and are found in the correct > place. Strange:http://paste.turbogears.org/paste/22610 > > Artem. > > On Dec 30, 11:23 pm, Artem Marchenko <[email protected]> > wrote: > > > correction: there is python.exe in c:\tg2.0b1\Scripts > > > On Dec 30, 11:21 pm, Artem Marchenko <[email protected]> > > wrote: > > > > Hi Mark > > > > After deactivating virtualenv I've got the same error: zope.sqlalchemy > > > is missing. > > > Further analysis of your words and tutorial instructions made me think > > > that the clone of the whole python and many libraries should be > > > present in the virtual environment. > > > > Well, first of all I didn't create any virtual environment at all > > > everything was created by the TG2 windows installer. c:\tg2.0b1 > > > directory created by installer contains \Scripts and \Lib with site- > > > packages inside (and zope.sqlalchemy is there), but there is no python > > > interpreter inside. > > > > OK, maybe windows installer created not 100% correct environment. So I > > > decided to create environment myself following the wiki tutorial. > > > Unfortunately it crashed midway with the error code that looks like > > > some pointer address:http://paste.turbogears.org/paste/22606 > > > Couple of days ago (just before the beta1 release) I was trying to > > > install TG2 manually, without the Windows installer and was stuck at > > > exactly the same point. Actually I decided to try the Windows > > > installer because [as I think] it creates virtualenv itself and > > > somehow does it without crash. > > > > Now I am stuck :) > > > Installer creates not fully working env and manual env creation > > > crashes midway. > > > > Best regards, > > > Artem. > > > > On Dec 30, 10:01 pm, "Mark Ramm" <[email protected]> wrote: > > > > > Looks like zope.sqlalchemy is in the regular python path, but you're > > > > inside > > > > the virtualenv. > > > > If the virtual environment was setup with --no-site-packages it will > > > > not see > > > > the system python path, it will have it's own. > > > > > I wonder if the problem is that you're using the virtual environment > > > > when > > > > everything is in the system python. > > > > > Try running it after deactivating the virtual env, and let me know if > > > > that > > > > helps. > > > > > --Mark > > > > > 2008/12/30 Artem Marchenko <[email protected]> > > > > > > Also the zope.sqlalchemy folder seems to be in the python system path: > > > > >http://paste.turbogears.org/paste/22592 > > > > > > On Dec 30, 9:37 pm, Artem Marchenko <[email protected]> wrote: > > > > > > Thanks for the quick reply, Mark! > > > > > > I decided to make a clean experiment, unistalled everything > > > > > > including > > > > > > the python itself and followed the instructions as carefully as I > > > > > > could. So far I failed. Here is a detailed script of what I did. I > > > > > > hope it helps. > > > > > > > Everything was happening on Windows Vista with disabled UAC. > > > > > > > 1. Installed TurboGears2-2.0b1-py25_Python-2.5.exe Everything was > > > > > > left > > > > > > as default. > > > > > > > 2. Then I went to freshly created c:\tg2tr folder and started > > > > > > following the wiki tutorial fromhttp:// > > > > > turbogears.org/2.0/docs/main/Wiki20/wiki20.html > > > > > > > 3. paster and everything else was not in the path so I activated the > > > > > > virtuaenv via c:\tg2.0b1\Scripts\activate.bat After that quickstart > > > > > > worked > > > > > > > 4. After that several tutorial steps went fine except for that I had > > > > > > to restart the service (since tutorial tells to modify __init__.py > > > > > > before you create page.py) > > > > > > > 5. At the initializeDB step I get no module zope.sqlalchemy: > > > > >http://paste.turbogears.org/paste/22586 > > > > > > At this point "paster tginfo" shows the followinghttp:// > > > > > paste.turbogears.org/paste/22587 > > > > > > At the same time if I go to C:\tg2.0b1\Lib\site-packages I see there > > > > > > the "zope.sqlalchemy-0.3-py2.5.egg" folder (not file, but folder > > > > > > with > > > > > > just a few *.py files in subdirectories). > > > > > > > 6. Following your advice I run "easy_install zope.sqlalchemy" and > > > > > > script tells that the correct version is already installed :/ > > > > >http://paste.turbogears.org/paste/22589 > > > > > > > Now that makes me really confused. It looks like everything is in > > > > > > fact > > > > > > on my hard drive, but something is correctly registered in half of > > > > > > the > > > > > > registries only. > > > > > > > On 30 Грд, 18:24, "Mark Ramm" <[email protected]> wrote: > > > > > > > > Hmm, sounds like perhaps zope.sqlalchemy is missing? > > > > > > > Is your virtualenv activated? Do you have zope.sqlalchemy in > > > > > > > your > > > > > > > virtualenv's site-packages directory (lib, python, site-packages) > > > > > > > > Can you post a traceback and the results of paster tginfo up on > > > > > > > paste.turbogears.org? > > > > > > > > I can't reproduce the problem you're seeing on osx or linux, and > > > > > > > don't > > > > > have > > > > > > > a windows box handy to try the installer. > > > > > > > > If it's just not having the package try easy_install > > > > > > > zope.sqlalchemy > > > > > and see > > > > > > > if that fixes your problem... > > > > > > > > 2008/12/30 Artem Marchenko <[email protected]> > > > > > > > > > Thank you for releasing the beta! > > > > > > > > I got acquainted with TG1 long time ago and was delaying the > > > > > > > > real > > > > > > > > trials until TG2 betas. > > > > > > > > It is indeed possible to install TG including Python with the > > > > > > > > Windows > > > > > > > > installers. > > > > > > > > > Unfortunately the wiki20 tutorial doesn't seem to work out of > > > > > > > > the box > > > > > > > > for me > > > > > > > > (http://www.nabble.com/2.0-tutorial-problem-td19719317.html). > > > > > > > > Whatever I do, it always fails in the initializeDB step with the > > > > > > > > dependency problems around sqlalchemy or zope.interface (after > > > > > running > > > > > > > > setup.py develop manually). > > > > > > > > > It would be great if somebody knowledgeable could go through the > > > > > > > > tutorial and tell where to fix it. > > > > > > > > > Best regards, > > > > > > > > Artem. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "TurboGears" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/turbogears?hl=en -~----------~----~----~----~------~----~------~--~---
