Hi,
This is the one that works:
-----------------------------------------------------------------------------------------
blaas@ubuntu:~/.vnc$ /opt/TurboVNC/bin/vncserver -verbose -wm mate-session
Desktop 'TurboVNC: ubuntu:1 (blaas)' started on display ubuntu:1
Creating default startup script /home/blaas/.vnc/xstartup.turbovnc
Starting applications specified in /home/blaas/.vnc/xstartup.turbovnc
Log file is /home/blaas/.vnc/ubuntu:1.log
------------------------------------------------------------------------------------------
blaas@ubuntu:~/.vnc$ /opt/TurboVNC/bin/vncserver -verbose -wm mate-session
TurboVNC Server (Xvnc) 64-bit v2.2.5 (build 20200507)
Copyright (C) 1999-2020 The VirtualGL Project and many others (see
README.txt)
Visit http://www.TurboVNC.org for more information on TurboVNC
19/02/2021 06:23:43 Using security configuration file
/etc/turbovncserver-security.conf
19/02/2021 06:23:43 Enabled security type 'tlsvnc'
19/02/2021 06:23:43 Enabled security type 'tlsotp'
19/02/2021 06:23:43 Enabled security type 'tlsplain'
19/02/2021 06:23:43 Enabled security type 'x509vnc'
19/02/2021 06:23:43 Enabled security type 'x509otp'
19/02/2021 06:23:43 Enabled security type 'x509plain'
19/02/2021 06:23:43 Enabled security type 'vnc'
19/02/2021 06:23:43 Enabled security type 'otp'
19/02/2021 06:23:43 Enabled security type 'unixlogin'
19/02/2021 06:23:43 Enabled security type 'plain'
19/02/2021 06:23:43 Desktop name 'TurboVNC: ubuntu:1 (blaas)' (ubuntu:1)
19/02/2021 06:23:43 Protocol versions supported: 3.3, 3.7, 3.8, 3.7t, 3.8t
19/02/2021 06:23:43 Listening for VNC connections on TCP port 5901
19/02/2021 06:23:43 Interface 0.0.0.0
19/02/2021 06:23:43 Listening for HTTP connections on TCP port 5801
19/02/2021 06:23:43 URL http://ubuntu:5801
19/02/2021 06:23:43 Interface 0.0.0.0
19/02/2021 06:23:43 Framebuffer: BGRX 8/8/8/8
19/02/2021 06:23:43 New desktop size: 1240 x 900
19/02/2021 06:23:43 New screen layout:
19/02/2021 06:23:43 0x00000040 (output 0x00000040): 1240x900+0+0
19/02/2021 06:23:43 Maximum clipboard transfer size: 1048576 bytes
19/02/2021 06:23:43 VNC extension running!
(II) IGLX: enabled GLX_MESA_copy_sub_buffer
(II) IGLX: Loaded and initialized swrast
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) XKB: Reusing cached keymap
(II) XKB: Reusing cached keymap
mate-session-check-accelerated: GL Helper exited with code 512
mate-session-check-accelerated: GLES Helper exited with code 512
SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
mate-session[2831]: WARNING: Unable to find provider '' of required
component 'dock'
Window manager warning: Log level 128: unsetenv() is not thread-safe and
should not be used after threads are created
Window manager warning: Log level 128: Name
com.canonical.AppMenu.Registrar does not exist on the session bus
unable to find device 11
mate-session[2831]: WARNING: Could not launch application
'hplip-systray.desktop': Unable to start application: Failed to execute
child process “hp-systray†(No such file or directory)
SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
Failure: Module initialisation failed
(process:3032): indicator-sound-WARNING **: 06:23:49.072:
volume-control-pulse.vala:735: unable to get pulse unix socket:
GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name
org.PulseAudio1 was not provided by any .service files
SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
** (process:3078): WARNING **: 06:23:49.538: could not find the desktop
file for 'org.gnome.Calendar.desktop'
caja-dropbox is not installed, doing nothing.
(process:3078): Indicator-Datetime-WARNING **: 06:23:49.600:
Unrecognized TZID: 'Etc/Utc'
(process:3078): Indicator-Datetime-WARNING **: 06:23:49.601:
Unrecognized TZID: 'Etc/Utc'
(process:3078): Indicator-Datetime-WARNING **: 06:23:49.753:
Unrecognized TZID: 'Etc/Utc'
SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
unable to find device FTSC1000:00 2808:1015
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 141 (RANDR)
Minor opcode of failed request: 2 (RRSetScreenConfig)
Serial number of failed request: 14
Current serial number in output stream: 14
(caja:2985): Gtk-WARNING **: 06:23:50.356: Failed to register client:
GDBus.Error:org.gnome.SessionManager.AlreadyRegistered: Unable to
register client
Initializing caja-open-terminal extension
** (update-notifier:3153): WARNING **: 06:23:51.520: already running?
no maximize: true
** (polkit-mate-authentication-agent-1:3062): WARNING **: 06:23:51.629:
Unable to register authentication agent:
GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: An authentication
agent already exists for the given subject
Cannot register authentication agent:
GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: An authentication
agent already exists for the given subject
** (mate-screensaver:3111): WARNING **: 06:23:51.654: screensaver
already running in this session
(nm-applet:3122): nm-applet-WARNING **: 06:23:51.743: An agent with this
ID is already registered for this user.
mate-optimus-applet: launched.
- nvidia-settings and prime-select not detected.
mate-optimus-applet: NVIDIA Optimus is not supported.
blueman-applet version 2.1.2 starting
There is an instance already running
[Debug] Autostart mode enabled.
[Welcome] Welcome was autostarted but autostart is disabled.
RuntimeError: object at 0x7fa599f881c0 of type FolderColorMenu is not
initialized
RuntimeError: object at 0x7fa599f1da80 of type RenameMenu is not initialized
INFO:root:The HUD is disabled via org.mate.hud in gsettings.
---------------------------------------------------------------------
On 2021-02-18 21:47, DRC wrote:
OK, and what does the log say if you do exactly the same thing on the
machine where MATE is working properly? I'm just trying to narrow down
what the differences in those two systems might be.
DRC
On 2/18/21 12:03 PM, Dieter Blaas wrote:
Thanks!
---------------------------------------------------------------------------------------------------------------
(base) blaas@ubuntu:~/.vnc$ /opt/TurboVNC/bin/vncserver -verbose -wm
mate-session
Desktop 'TurboVNC: ubuntu:1 (blaas)' started on display ubuntu:1
Starting applications specified in /home/blaas/.vnc/xstartup.turbovnc
Log file is /home/blaas/.vnc/ubuntu:1.log
------------------------------------------------------------------------------------------------------------------
TurboVNC Server (Xvnc) 64-bit v2.2.5 (build 20200507)
Copyright (C) 1999-2020 The VirtualGL Project and many others (see
README.txt)
Visit http://www.TurboVNC.org for more information on TurboVNC
18/02/2021 19:00:08 Using security configuration file
/etc/turbovncserver-security.conf
18/02/2021 19:00:08 Enabled security type 'tlsvnc'
18/02/2021 19:00:08 Enabled security type 'tlsotp'
18/02/2021 19:00:08 Enabled security type 'tlsplain'
18/02/2021 19:00:08 Enabled security type 'x509vnc'
18/02/2021 19:00:08 Enabled security type 'x509otp'
18/02/2021 19:00:08 Enabled security type 'x509plain'
18/02/2021 19:00:08 Enabled security type 'vnc'
18/02/2021 19:00:08 Enabled security type 'otp'
18/02/2021 19:00:08 Enabled security type 'unixlogin'
18/02/2021 19:00:08 Enabled security type 'plain'
18/02/2021 19:00:08 Desktop name 'TurboVNC: ubuntu:1 (blaas)'
(ubuntu:1)
18/02/2021 19:00:08 Protocol versions supported: 3.3, 3.7, 3.8, 3.7t,
3.8t
18/02/2021 19:00:08 Listening for VNC connections on TCP port 5901
18/02/2021 19:00:08 Interface 0.0.0.0
18/02/2021 19:00:08 Listening for HTTP connections on TCP port 5801
18/02/2021 19:00:08 URL http://ubuntu:5801
18/02/2021 19:00:08 Interface 0.0.0.0
18/02/2021 19:00:08 Framebuffer: BGRX 8/8/8/8
18/02/2021 19:00:08 New desktop size: 1240 x 900
18/02/2021 19:00:08 New screen layout:
18/02/2021 19:00:08 0x00000040 (output 0x00000040): 1240x900+0+0
18/02/2021 19:00:08 Maximum clipboard transfer size: 1048576 bytes
18/02/2021 19:00:08 VNC extension running!
(II) IGLX: enabled GLX_MESA_copy_sub_buffer
(II) IGLX: Loaded and initialized swrast
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) XKB: Reusing cached keymap
(II) XKB: Reusing cached keymap
** (mate-session:4043): WARNING **: 19:00:09.545: Unable to connect to
dbus: Could not connect: Connection refused
** (mate-session-check-accelerated:4073): WARNING **: 19:00:09.598:
Unable to connect to dbus: Could not connect: Connection refused
mate-session-check-accelerated: GL Helper exited with code 512
** (mate-session-check-accelerated-gles-helper:4098): WARNING **:
19:00:09.760: Unable to connect to dbus: Could not connect: Connection
refused
mate-session-check-accelerated: GLES Helper exited with code 512
mate-session[4043]: WARNING: Could not make bus activated clients
aware of DISPLAY=:1 environment variable: Could not connect:
Connection refused
mate-session[4043]: WARNING: Could not make bus activated clients
aware of MATE_DESKTOP_SESSION_ID=this-is-deprecated environment
variable: Could not connect: Connection refused
(mate-session:4043): dconf-WARNING **: 19:00:09.833: failed to commit
changes to dconf: Could not connect: Connection refused
mate-session[4043]: WARNING: Could not make bus activated clients
aware of
SESSION_MANAGER=local/ubuntu:@/tmp/.ICE-unix/4043,unix/ubuntu:/tmp/.ICE-unix/4043
environment variable: Could not connect: Connection refused
mate-session[4043]: GLib-GIO-CRITICAL:
g_dbus_connection_register_object: assertion 'G_IS_DBUS_CONNECTION
(connection)' failed
mate-session[4043]: GLib-GIO-CRITICAL:
g_dbus_connection_register_object: assertion 'G_IS_DBUS_CONNECTION
(connection)' failed
mate-session[4043]: GLib-GIO-CRITICAL:
g_dbus_connection_get_unique_name: assertion 'G_IS_DBUS_CONNECTION
(connection)' failed
------------------------------------------------------------------------
Dieter Blaas,
Max Perutz Laboratories
Medical University of Vienna,
Inst. Med. Biochem., Vienna Biocenter (VBC),
Dr. Bohr Gasse 9/3,
A-1030 Vienna, Austria,
Tel: 0043 1 4277 61630,
Mobile: 0043 699 1942 1659
e-mail: [email protected]
------------------------------------------------------------------------
On 18.02.2021 18:29, DRC wrote:
Please try
/opt/TurboVNC/bin/vncserver -verbose -wm mate-session
so I can be sure that the mate-session error is indeed occurring in a
server instance with a working OpenGL implementation.
On 2/18/21 11:11 AM, Dieter Blaas wrote:
no error message here:
(base) blaas@ubuntu:/opt/TurboVNC/bin$ vncserver -verbose
Desktop 'TurboVNC: ubuntu:1 (blaas)' started on display ubuntu:1
Starting applications specified in
/home/blaas/.vnc/xstartup.turbovnc
Log file is /home/blaas/.vnc/ubuntu:1.log
-------------------------------------------------------------------------------
This is ubuntu:1.log:
base) blaas@ubuntu:~/.vnc$ cat ubuntu:1.log
TurboVNC Server (Xvnc) 64-bit v2.2.5 (build 20200507)
Copyright (C) 1999-2020 The VirtualGL Project and many others (see
README.txt)
Visit http://www.TurboVNC.org for more information on TurboVNC
18/02/2021 18:08:00 Using security configuration file
/etc/turbovncserver-security.conf
18/02/2021 18:08:00 Enabled security type 'tlsvnc'
18/02/2021 18:08:00 Enabled security type 'tlsotp'
18/02/2021 18:08:00 Enabled security type 'tlsplain'
18/02/2021 18:08:00 Enabled security type 'x509vnc'
18/02/2021 18:08:00 Enabled security type 'x509otp'
18/02/2021 18:08:00 Enabled security type 'x509plain'
18/02/2021 18:08:00 Enabled security type 'vnc'
18/02/2021 18:08:00 Enabled security type 'otp'
18/02/2021 18:08:00 Enabled security type 'unixlogin'
18/02/2021 18:08:00 Enabled security type 'plain'
18/02/2021 18:08:00 Desktop name 'TurboVNC: ubuntu:1 (blaas)'
(ubuntu:1)
18/02/2021 18:08:00 Protocol versions supported: 3.3, 3.7, 3.8,
3.7t, 3.8t
18/02/2021 18:08:00 Listening for VNC connections on TCP port 5901
18/02/2021 18:08:00 Interface 0.0.0.0
18/02/2021 18:08:00 Listening for HTTP connections on TCP port 5801
18/02/2021 18:08:00 URL http://ubuntu:5801
18/02/2021 18:08:00 Interface 0.0.0.0
18/02/2021 18:08:00 Framebuffer: BGRX 8/8/8/8
18/02/2021 18:08:00 New desktop size: 1240 x 900
18/02/2021 18:08:00 New screen layout:
18/02/2021 18:08:00 0x00000040 (output 0x00000040): 1240x900+0+0
18/02/2021 18:08:00 Maximum clipboard transfer size: 1048576 bytes
18/02/2021 18:08:00 VNC extension running!
(II) IGLX: enabled GLX_MESA_copy_sub_buffer
(II) IGLX: Loaded and initialized swrast
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) XKB: Reusing cached keymap
(II) XKB: Reusing cached keymap
No window manager startup script found. Use the TVNC_WM environment
variable to specify the path to a window manager startup script or
executable. Falling back to TWM.
TWM not found. I give up.
----------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------
Dieter Blaas,
Max Perutz Laboratories
Medical University of Vienna,
Inst. Med. Biochem., Vienna Biocenter (VBC),
Dr. Bohr Gasse 9/3,
A-1030 Vienna, Austria,
Tel: 0043 1 4277 61630,
Mobile: 0043 699 1942 1659
e-mail: [email protected]
------------------------------------------------------------------------
On 18.02.2021 17:46, DRC wrote:
Try passing -verbose to /opt/TurboVNC/bin/vncserver and see if it
prints
any OpenGL errors in the server log. This issue could be due to
the
system not having the Mesa DRI drivers installed. If the software
OpenGL implementation in the TurboVNC Server fails to initialize
for any
reason, then the server won't have a GLX extension, which can cause
window managers to fail in the manner described below.
On 2/18/21 12:10 AM, Dieter Blaas wrote:
Sorry, I thought that I already answered. Here is the result:
On 16.02.2021 21:40, DRC wrote:
Just to confirm, $wm = "mate-session" is followed by a
semicolon? If
that's not the issue, then try running
The semicolon is there!
/opt/TurboVNC/bin/vncserver -noxstartup
DISPLAY=:{n} mate-session
(where {n} is the TurboVNC session's display number)
and see if mate-session prints any errors.
$ /opt/TurboVNC/bin/vncserver -noxstartup
Desktop 'TurboVNC: ubuntu:1 (blaas)' started on display ubuntu:1
Log file is /home/blaas/.vnc/ubuntu:1.log
(base) blaas@ubuntu:~$ DISPLAY=:1 mate-session
mate-session-check-accelerated: GL Helper exited with code 512
mate-session-check-accelerated: GLES Helper exited with code 512
mate-session[7670]: WARNING: Failed to acquire
org.gnome.SessionManager
$wm = "2d" will enable the "fallback" or "flashback" window
manager on
RHEL/CentOS or Ubuntu, which is basically just GNOME 3 with a
look &
feel that is more similar to GNOME 2. That isn't the same as
MATE.
(MATE literally is GNOME 2, or rather, a fork of it.)
DRC
Thanks, Dieter
On 2/16/21 10:18 AM, Dieter Blaas wrote:
Thanks for the hints!
1) I shall try to solve the Centos problem following your advice
in
the
next days!
2) I checked turbovncserver.conf and the entry "_'$wm =
"mate-session"_
is there. When replacing it with "$wm = "2d" as of
## Java TurboVNC Viewer) or 0 to disable
*## $wm -- the window manager startup script to use
(for
instance,**
**## "mate-session" or "2d")**
**##*
I get the same black screen but this time NO ERROR MESSAGE!
best, Dieter
__
------------------------------------------------------------------------
Dieter Blaas,
Max Perutz Laboratories
Medical University of Vienna,
Inst. Med. Biochem., Vienna Biocenter (VBC),
Dr. Bohr Gasse 9/3,
A-1030 Vienna, Austria,
Tel: 0043 1 4277 61630,
Mobile: 0043 699 1942 1659
e-mail: [email protected]
------------------------------------------------------------------------
On 12.02.2021 18:12, DRC wrote:
On 2/11/21 11:11 PM, Dieter Blaas wrote:
*YumRepo Error: All mirror URLs are not using ftp, http[s] or
file.*
*** Eg. Invalid release/repo/arch combination/*
YumRepo Error: All mirror URLs are not using ftp, http[s] or
file.
Eg. Invalid release/repo/arch combination/
removing mirrorlist with no valid mirrors:
/var/cache/yum/x86_64/6/centos-sclo-rh/mirrorlist.txt
*Error: Cannot find a valid baseurl for repo: centos-sclo-rh*
(base) [blaasd3@blaaslinpc:0 Downloads]$
*googling I found that this error results from centos-6.10 EOL
- it
gets directed to a not-any-more-existing repository*
Probably I would need compiling it myself...
No, you just need to switch your CentOS YUM repository URLs so
that
YUM uses the vault.centos.org repository. That is always
necessary
when using CentOS releases that are past EOL. That issue is
unrelated
to TurboVNC. You can still install the TurboVNC RPM directly,
without
using YUM, or you can simply disable the CentOS YUM
repositories, and
the TurboVNC YUM repository will continue to work.
_2) I edited turbovnc.conf to contain the line '$wm =
"mate-session";' in BOTH laptops._
I can now connect perfectly well from the Lenovo W520 to the
Lenovo
ideapad-miix-320-10icr BUT in other direction I still get a
black
screen with the error I detailed before. This is very strange
as
both
PCs have the same OS, I run an upgrade, I made the changes to
the
turbovncserver.conf file, I restarted them but still the error
persists!
No clue, sorry. I'm assuming that you removed
~/.vnc/xstartup.turbovnc on both machines prior to starting the
TurboVNC Server. As a sanity check, try passing
-wm mate-session
to /opt/TurboVNC/bin/vncserver on the machine that isn't
working. It
really does appear, from the log, that it is trying to run
xinitrc
instead of mate-session, so perhaps there is a typo in
turbovncserver.conf.
snippet from the log file on the Lenovo W520:
12/02/2021 06:05:22 Maximum clipboard transfer size: 1048576
bytes
12/02/2021 06:05:22 VNC extension running!
** (mate-session:2795): WARNING **: 06:05:23.448: Unable to
connect
to dbus: Could not connect: Connection refused
** (mate-session-check-accelerated:2825): WARNING **:
06:05:23.499:
Unable to connect to dbus: Could not connect: Conne
ction refused
mate-session-check-accelerated: GL Helper exited with code 512
** (mate-session-check-accelerated-gles-helper:2850): WARNING
**:
06:05:23.591: Unable to connect to dbus: Could not co
nnect: Connection refused
mate-session-check-accelerated: GLES Helper exited with code
512
mate-session[2795]: WARNING: Could not make bus activated
clients
aware of DISPLAY=:1 environment variable: Could not c
onnect: Connection refused
mate-session[2795]: WARNING: Could not make bus activated
clients
aware of MATE_DESKTOP_SESSION_ID=this-is-deprecated e
nvironment variable: Could not connect: Connection refused
(mate-session:2795): dconf-WARNING **: 06:05:23.662: failed to
commit
changes to dconf: Could not connect: Connection r
efused
Thanks for hints, Dieter
------------------------------------------------------------------------
Dieter Blaas,
Max Perutz Laboratories
Medical University of Vienna,
Inst. Med. Biochem., Vienna Biocenter (VBC),
Dr. Bohr Gasse 9/3,
A-1030 Vienna, Austria,
Tel: 0043 1 4277 61630,
Mobile: 0043 699 1942 1659
e-mail: [email protected]
------------------------------------------------------------------------
On 11.02.2021 20:21, DRC wrote:
On 2/11/21 12:50 AM, Dieter Blaas wrote:
Thank you very much!
To exclude problems possibly due to the different Linux
versions
(the Centos on one PC is 6.10 and refuses installation of
the
newest TurboVNC version as it has passed its EOF)
How is the installation refused on the CentOS 6 machine?
TurboVNC
2.2.x is still built with a CentOS 5 Docker container, so it
should
install on CentOS 6 with no problems. Even TurboVNC 3.0 is
built
with a CentOS 6 Docker container, so it should work as well.
Referring to
https://turbovnc.org/Documentation/Compatibility22 and
https://turbovnc.org/Documentation/Compatibility30, I
specifically
tested CentOS 6 with TurboVNC 2.2.x stable and 3.0 evolving.
I now installed the most recent version of TurboVNC on my
laptops,
both running Ubuntu mate 20.04 with Metacity (Marco), as
reported
by "wmctrl -m". I started with "/opt/TurboVNC/bin/vncserver
-geometry 1870x980'". When connecting from one to the other,
regardless from which direction, I get a black screen with
the
message: "Could not acquire name on session bus!" Exactly
the same
occurs when I use the RealVNC client. So, I guess, it has to
do
with the setup of the TurboVNC-server.
On modern Ubuntu releases, it is generally necessary to start
MATE
explicitly, by passing '-wm mate-session' to
/opt/TurboVNC/bin/vncserver or specifying '$wm =
"mate-session";' in
turbovncserver.conf. That's why I referred you to
https://turbovnc.org/Documentation/Compatibility22, which
instructs
the reader to do that. On Ubuntu 18+, attempting to start
MATE
through xinitrc or Xsession (which is what xstartup.turbovnc
will do
if -wm/$wm is not specified) will only work if there is no
other
instance of MATE already running. xstartup.turbovnc unsets
DBUS_SESSION_BUS_ADDRESS, which normally causes every
instance of
MATE to use a separate DBus address. However,
/etc/X11/Xsession.d/20dbus_xdg-runtime, which is invoked by
either
Xsession or xinitrc, explicitly sets DBUS_SESSION_BUS_ADDRESS
to
unix:path=$XDG_RUNTIME_DIR/bus. That means that every MATE
instance
will share the same DBus address, and the second and
subsequent
instances will error out with "Could not acquire name on
session
bus!".
As already stated previously, I have been using this precise
setup
successfully from Ubuntu-10.04 onwards with the respective
latest
versions of TurboVNC. I must say that that I had similar
problems
in the past but some painful tinkering eventually solved it.
However, I never found out the reason! For example, it might
have
been PATH, Keyring, or what else. Once running I usually
avoided by
all means to reboot and start again trying out things....
Thanks again for providing this great software and for your
help,
Dieter
------------------------------------------------------------------------
Dieter Blaas,
Max Perutz Laboratories
Medical University of Vienna,
Inst. Med. Biochem., Vienna Biocenter (VBC),
Dr. Bohr Gasse 9/3,
A-1030 Vienna, Austria,
Tel: 0043 1 4277 61630,
Mobile: 0043 699 1942 1659
e-mail: [email protected]
------------------------------------------------------------------------
On 10.02.2021 18:13, DRC wrote:
Specifically which versions of the operating systems and
TurboVNC
are you using? If you are trying to use a window manager
other
than the default (GNOME 3) on recent CentOS and Ubuntu
releases,
then please specify the window manager you are trying to
use.
If you haven't already, I would suggest upgrading to the
latest
stable TurboVNC release (2.2.5), removing
~/.vnc/xstartup.turbovnc, and restarting the TurboVNC
Server.
This is sometimes necessary when upgrading the operating
system,
because the TurboVNC Server will re-create a default
version of
~/.vnc/xstartup.turbovnc if it doesn't exist, and the
default
xstartup.turbovnc that the server creates may contain new
window
manager compatibility fixes. (NOTE: TurboVNC 3.0 will use
a
system-wide xstartup.turbovnc script, so this process won't
be
necessary anymore.) Also refer to
https://turbovnc.org/Documentation/Compatibility22 for
instructions on how to launch specific window managers on
specific
operating systems and the known issues with each. On
CentOS 7
specifically, you have to pass -wm gnome-session to
/opt/TurboVNC/bin/vncserver or set $wm = "gnome-session";
in In
~/.vnc/turbovncserver.conf or /etc/turbovncserver.conf in
order to
use GNOME 3 (yet another thing that will be fixed in
TurboVNC
3.0.)
Also, you'll get a lot better performance with the TurboVNC
Viewer
than with the RealVNC Viewer. :) The compatibility
intersection
between RealVNC and TurboVNC (or TigerVNC, for that matter)
includes only old and sub-optimal RFB encoding methods.
RealVNC
doesn't support Tight encoding, much less the accelerated
version
of it that TurboVNC uses, and it also doesn't support the
RFB
flow
control extensions (which are used to improve performance
on
high-latency networks.)
On 2/10/21 8:15 AM, Dieter Blaas wrote:
Hi,
I have been using the TurboVNC server (running on
Centos,
Ubuntu, and Windows) together with the RealVNC client
since many
years with extreme satisfaction. However, due to updating
and
changes in the system I am now encountering two
ill-defined
problems depending on the machine and OS (centos or
Ubuntu) I
use:
1) On connecting to the server (ubuntu) I receive some
messages
about 'Keyring' and only can proceed when entering the
password
on the server to close the 'Keyring' panel. Once done,
there is
no further problem but on reboot I have to do it again,
which
requires to be physically present at the server.
2) When starting turbovnc server (centos) as normal user
and
connecting from remote I only get a grey screen sometimes
with
stripes. When starting turbovnc server as root it works as
expected but I am then root for everything I do, which is
not
really good.....
I cannot pin down the reason for this behaviour and it
occurs
mostly after updating, upgrading, reboot etc. I would be
extremely thankful for hints.
Here just snippets of the log file when I start the server
as
normal user under centos:
----------------
AUDIT: Wed Feb 10 00:58:11 2021: 1309 Xvnc: *client 2
rejected
from local host*
gnome-session[1335]: WARNING: *Could not make bus
activated
clients aware of DISPLAY=:3 environment variable: Failed
to
connect to socket /tmp/dbus-V4JphZTJqg: Connection
refused*
gnome-session[1335]: WARNING: *Could not make bus
activated
clients aware of
GNOME_DESKTOP_SESSION_ID=this-is-deprecated
environment variable: Failed to connect to socket
*/tmp/dbus-V4JphZTJqg: *Connection refused*
gnome-session[1335]: WARNING: Could not make bus activated
clients aware of
SESSION_MANAGER=local/unix:@/tmp/.ICE-unix/1335,unix/unix:/tmp/.ICE-unix/1335
environment variable: Failed to connect to socket
/tmp/dbus-V4JphZTJqg: Connection refused
XIO: fatal IO error 11 (Resource temporarily unavailable)
on
---------------
And when I start is as root:
Connections: accepted: xxx.xxx.xxx.xxx::40779
SConnection: Client needs protocol version 3.8
SConnection: Client requests security type VncAuth(2)
VNCSConnST: Server default pixel format depth 24
(32bpp)
little-endian rgb888
VNCSConnST: Client pixel format depth 24 (32bpp)
little-endian
rgb888
------------------
Thanks for help, best, Dieter
------------------------------------------------------------------------
Dieter Blaas,
Max Perutz Laboratories
Medical University of Vienna,
Inst. Med. Biochem., Vienna Biocenter (VBC),
Dr. Bohr Gasse 9/3,
A-1030 Vienna, Austria,
Tel: 0043 1 4277 61630,
Mobile: 0043 699 1942 1659
e-mail: [email protected]
------------------------------------------------------------------------
--
You received this message because you are subscribed to
the
Google Groups "TurboVNC User Discussion/Support" group.
To unsubscribe from this group and stop receiving emails
from
it,
send an email to
[email protected]
<mailto:[email protected]>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/turbovnc-users/1c020406-e17c-f248-2550-0fbc03ec0a28%40meduniwien.ac.at
<https://groups.google.com/d/msgid/turbovnc-users/1c020406-e17c-f248-2550-0fbc03ec0a28%40meduniwien.ac.at?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the
Google
Groups "TurboVNC User Discussion/Support" group.
To unsubscribe from this group and stop receiving emails
from it,
send an email to
[email protected]
<mailto:[email protected]>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/turbovnc-users/3f3788ec-d907-f9bf-de19-b35f5c720987%40virtualgl.org
<https://groups.google.com/d/msgid/turbovnc-users/3f3788ec-d907-f9bf-de19-b35f5c720987%40virtualgl.org?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the
Google
Groups "TurboVNC User Discussion/Support" group.
To unsubscribe from this group and stop receiving emails from
it,
send an email to [email protected]
<mailto:[email protected]>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/turbovnc-users/308d26da-cef5-49b1-030e-05f58c376a3f%40virtualgl.org
<https://groups.google.com/d/msgid/turbovnc-users/308d26da-cef5-49b1-030e-05f58c376a3f%40virtualgl.org?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the
Google
Groups "TurboVNC User Discussion/Support" group.
To unsubscribe from this group and stop receiving emails from
it,
send an email to [email protected]
<mailto:[email protected]>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/turbovnc-users/1430d141-1cb0-23c7-552c-3fa7b1b521ab%40meduniwien.ac.at
<https://groups.google.com/d/msgid/turbovnc-users/1430d141-1cb0-23c7-552c-3fa7b1b521ab%40meduniwien.ac.at?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the
Google
Groups "TurboVNC User Discussion/Support" group.
To unsubscribe from this group and stop receiving emails from
it,
send
an email to [email protected]
<mailto:[email protected]>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/turbovnc-users/c7585861-e735-a27a-f102-7e7204da448f%40virtualgl.org
<https://groups.google.com/d/msgid/turbovnc-users/c7585861-e735-a27a-f102-7e7204da448f%40virtualgl.org?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the
Google
Groups "TurboVNC User Discussion/Support" group.
To unsubscribe from this group and stop receiving emails from
it, send
an email to [email protected]
<mailto:[email protected]>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/turbovnc-users/4fbe41f4-ba10-bdc2-f608-0eff711d755f%40meduniwien.ac.at
<https://groups.google.com/d/msgid/turbovnc-users/4fbe41f4-ba10-bdc2-f608-0eff711d755f%40meduniwien.ac.at?utm_medium=email&utm_source=footer>.
--
Dr. Dieter Blaas
Max F. Perutz Laboratories,
Inst. Med. Biochem.,
Med. Univ. Vienna
Dr. Bohr Gasse 9/3
A-1030 Vienna, Austria
Tel. 0043 1 4277 61630
Fax 0043 1 4277 9616
--
You received this message because you are subscribed to the Google Groups "TurboVNC
User Discussion/Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/turbovnc-users/4e22f300-24dc-1593-96e1-b5fa7c0f0934%40meduniwien.ac.at.
