I did the following diff command and got quite a lot of changes (listed
below):
# diff tuscany_sca_config.h.in tuscany_sca_config.h
Are these not needed?
If not, I can get to work on removing all references to the
file.
If so, then we still need to figure out how to create the file.
I just realized, its 23:30, there... Go to bed! ;)
--------------------
Brady Johnson
Lead Software Developer - HydraSCA
Rogue Wave Software - [EMAIL PROTECTED]
0a1
> /* tuscany_sca_config.h. Generated by configure. */
4c5
< #undef CLOSEDIR_VOID
---
> /* #undef CLOSEDIR_VOID */
8c9
< #undef HAVE_DIRENT_H
---
> #define HAVE_DIRENT_H 1
11c12
< #undef HAVE_DLFCN_H
---
> #define HAVE_DLFCN_H 1
14c15
< #undef HAVE_DOPRNT
---
> /* #undef HAVE_DOPRNT */
17c18
< #undef HAVE_GETCWD
---
> #define HAVE_GETCWD 1
20c21
< #undef HAVE_INTTYPES_H
---
> #define HAVE_INTTYPES_H 1
23c24
< #undef HAVE_MEMORY_H
---
> #define HAVE_MEMORY_H 1
26c27
< #undef HAVE_NDIR_H
---
> /* #undef HAVE_NDIR_H */
29c30
< #undef HAVE_PUTENV
---
> #define HAVE_PUTENV 1
33c34
< #undef HAVE_STAT_EMPTY_STRING_BUG
---
> /* #undef HAVE_STAT_EMPTY_STRING_BUG */
36c37
< #undef HAVE_STDBOOL_H
---
> #define HAVE_STDBOOL_H 1
39c40
< #undef HAVE_STDINT_H
---
> #define HAVE_STDINT_H 1
42c43
< #undef HAVE_STDLIB_H
---
> #define HAVE_STDLIB_H 1
45c46
< #undef HAVE_STRDUP
---
> #define HAVE_STRDUP 1
48c49
< #undef HAVE_STRINGS_H
---
> #define HAVE_STRINGS_H 1
51c52
< #undef HAVE_STRING_H
---
> #define HAVE_STRING_H 1
55c56
< #undef HAVE_SYS_DIR_H
---
> /* #undef HAVE_SYS_DIR_H */
59c60
< #undef HAVE_SYS_NDIR_H
---
> /* #undef HAVE_SYS_NDIR_H */
62c63
< #undef HAVE_SYS_STAT_H
---
> #define HAVE_SYS_STAT_H 1
65c66
< #undef HAVE_SYS_TIME_H
---
> #define HAVE_SYS_TIME_H 1
68c69
< #undef HAVE_SYS_TYPES_H
---
> #define HAVE_SYS_TYPES_H 1
71c72
< #undef HAVE_UNISTD_H
---
> #define HAVE_UNISTD_H 1
74c75
< #undef HAVE_VPRINTF
---
> #define HAVE_VPRINTF 1
77c78
< #undef HAVE__BOOL
---
> #define HAVE__BOOL 1
80c81
< #undef IS_DARWIN
---
> /* #undef IS_DARWIN */
84c85
< #undef LSTAT_FOLLOWS_SLASHED_SYMLINK
---
> #define LSTAT_FOLLOWS_SLASHED_SYMLINK 1
87c88
< #undef PACKAGE
---
> #define PACKAGE "tuscany_sca_native"
90c91
< #undef PACKAGE_BUGREPORT
---
> #define PACKAGE_BUGREPORT ""
93c94
< #undef PACKAGE_NAME
---
> #define PACKAGE_NAME "tuscany_sca_native"
96c97
< #undef PACKAGE_STRING
---
> #define PACKAGE_STRING "tuscany_sca_native 1.0-incubator-M3"
99c100
< #undef PACKAGE_TARNAME
---
> #define PACKAGE_TARNAME "tuscany_sca_native"
102c103
< #undef PACKAGE_VERSION
---
> #define PACKAGE_VERSION "1.0-incubator-M3"
105c106
< #undef STDC_HEADERS
---
> #define STDC_HEADERS 1
108c109
< #undef VERSION
---
> #define VERSION "1.0-incubator-M3"
111c112
< #undef const
---
> /* #undef const */
116c117
< #undef inline
---
> /* #undef inline */
-----Original Message-----
From: Pete Robbins [mailto:[EMAIL PROTECTED]
Sent: Wednesday, July 18, 2007 4:22 PM
To: [email protected]
Subject: Re: [SCA Native] preliminary ant build
yeah I figured that... I did exactly the same when committing changes
earlier! I dodn't commit the changes inthe tools folder.
Cheers,
On 18/07/07, Brady Johnson <[EMAIL PROTECTED]> wrote:
>
> Ok, I wasn't aware that I had changed the tools.
>
> I simply did a "svn diff . > patch_file" from the tuscany root dir.
> You can disregard the tools changes. I'll look into it.
>
> Thanks
>
> --------------------
> Brady Johnson
> Lead Software Developer - HydraSCA
> Rogue Wave Software - [EMAIL PROTECTED]
>
>
> -----Original Message-----
> From: Pete Robbins [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, July 18, 2007 4:16 PM
> To: [email protected]
> Subject: Re: [SCA Native] preliminary ant build
>
> Cool! I've applied this change as well. The update2 patch contained
> changes to the tools/TuscanyDriver/build.xml. This doesn't work so you
> may want to look at it.
>
> Cheers,
>
> On 18/07/07, Brady Johnson <[EMAIL PROTECTED]> wrote:
> >
> > If that's all we need the tuscany_sca_config.h file for then, yes
> > this
>
> > just got a whole lot easier. We can do the following on the
> > Tuscany-BaseCompiler
> >
> > <condition property="mac" value="true">
> > <os family="mac"/>
> > </condition>
> >
> > <compiler id="Tuscany-BaseCompiler" multithreaded="true"
> > exceptions="true" rtti="true">
> > <defineset if="windows"
> > define="WIN32,_CRT_SECURE_NO_DEPRECATE,SCA_EXPORTS"/>
> > <defineset if="mac" define="IS_DARWIN"/>
> > <includepath path="${sdo.include.dir}"/>
> > <includepath path="${tuscanySCA.root.dir}"/> <!--
> > tuscany_sca_config.h -->
> > <includepath path="${tuscanySCA.root.src.dir}"/>
> > <includepath path="${tuscanySCA.root.src.dir}/core/src"/>
> > </compiler>
> >
> > --------------------
> > Brady Johnson
> > Lead Software Developer - HydraSCA
> > Rogue Wave Software - [EMAIL PROTECTED]
> >
> > -----Original Message-----
> > From: Pete Robbins [mailto:[EMAIL PROTECTED]
> > Sent: Wednesday, July 18, 2007 3:41 PM
> > To: [email protected]
> > Subject: Re: [SCA Native] preliminary ant build
> >
> > On 18/07/07, Brady Johnson <[EMAIL PROTECTED]> wrote:
> > >
> > > I uploaded a patch on top of what you submit to svn.
> > >
> > > Here is a description of what I changed:
> > >
> > > - Changed the name of compilers.xml to system.xml.
> > >
> > > - This update has better support for a platform.properties file
> > > that
>
> > > is completely empty.
> > > That is, all of the platform dependent items are figured out by
> ant.
> > > If they are set in
> > > the platform.properties file then they override the ant
> > determination.
> > >
> > > - Better directory path management has been added to the root
> > > build.xml and runtime/core/src/build.xml files.
> > >
> > > - The install and clean targets in runtime/core/src have been
> > completed.
> > >
> > >
> > > With respect to your latest post regarding "tuscany-sca-config.h":
> > > I knew this was a problem on clean systems and had envisioned
> > > either
>
> > > running a script or using a slimmed down automake/configure to
> > > setup
>
> > > this file and any platform specific parameters. That's certainly
> > > something we'll have to address, what do you think?
> > >
> >
> > The only reason we use this automake generated file is to set the
> > IS_DARWIN compiler flag for running on Mac OS X. I expect we can use
> > a
>
> > different technique in ant to set this flag. Is there a "family=mac"
> > or somesuch in ant? The automake simply runs a 'uname -s' command to
> > figure it out.
> >
> > I think a goal for this shoul be that I can do a clean extract from
> > svn and type "ant" in the top level directory and it will build with
> > everything defaulted. We need various pre-reqs defined (SDO
> > loccation,
> > + other pre-reqs) but we should try to make this as simple as
> > possible.
> >
> > Cheers,
> >
> >
> > >
> > > --------------------
> > > Brady Johnson
> > > Lead Software Developer - HydraSCA Rogue Wave Software -
> > > [EMAIL PROTECTED]
> > >
> > >
> > > -----Original Message-----
> > > From: Pete Robbins [mailto:[EMAIL PROTECTED]
> > > Sent: Wednesday, July 18, 2007 9:22 AM
> > > To: [email protected]
> > > Subject: Re: [SCA Native] preliminary ant build
> > >
> > > the install dir defaults to sca/deploy so I think we don't need
> > > any properties other than overrides.
> > >
> > > I'll check in what I have. so youi can see.
> > >
> > > Cheers,
> > >
> > > On 18/07/07, Brady Johnson <[EMAIL PROTECTED]> wrote:
> > > >
> > > > Pete,
> > > >
> > > > That's a good idea. Then the only thing that really need to be
> > > > set
>
> > > > in platform.properties file would be:
> > > > tuscanySCA.install.dir
> > > > and any possible overides
> > > >
> > > > I'll put that together real quick and upload it.
> > > >
> > > > Thanks
> > > >
> > > > --------------------
> > > > Brady Johnson
> > > > Lead Software Developer - HydraSCA Rogue Wave Software -
> > > > [EMAIL PROTECTED]
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: Pete Robbins [mailto:[EMAIL PROTECTED]
> > > > Sent: Wednesday, July 18, 2007 9:00 AM
> > > > To: [email protected]
> > > > Subject: Re: [SCA Native] preliminary ant build
> > > >
> > > > On 18/07/07, Pete Robbins <[EMAIL PROTECTED]> wrote:
> > > > > On 18/07/07, Brady Johnson <[EMAIL PROTECTED]> wrote:
> > > > > >
> > > > > > Pete,
> > > > > >
> > > > > > Thanks for trying out the ant build scripts.
> > > > > >
> > > > > > Regarding core.dir, you're right, the name will need to
> change.
> > > > > > I can do that no problem.
> > > > > >
> > > > > > As for the "tuscanySCA.root.dir" : Your suggestion will work
> > > > > > if you only execute ant from the root directory, but not if
> > > > > > you execute ant
> > > >
> > > > > > from the runtime/core/src directory. That's why I put it in
> > > > > > the platform.properties, which is accessed by all
build.xml's.
>
> > > > > > Its better ant coding style to have anything that needs to
> > > > > > be configured
> > > >
> > > > > > in a properties file, not in an ant build.xml file.
> > > > > >
> > > > >
> > > > > Yes... I realized that would limit you to running ant from the
> > > > > top
> >
> > > > > level. So, as most of the info in platform.properties can be
> > > > > deduced
> > >
> > > > > would a better solution be to have a top level (or in
> > > > > antscripts
> > > > > dir) platform-properties.xml that
> > > > > a) imports platform.properties for any overrides
> > > > > b) sets the properties conditional on the platform.
> > > > >
> > > > > e.g.
> > > > > <condition property="lib.ext" value='.so' '>
> > > > > <os family='linux'/>
> > > > > </condition>
> > > > > <condition property="lib.ext" value='.dll' '>
> > > > > <os family='windows'/>
> > > > > </condition>
> > > > > <condition property="lib.ext" value='.dylib '>
> > > > > <os family='MacOSX?????'/>
> > > > > </condition>
> > > > >
> > > >
> > > > the build.xml files would all import this top level file:
> > > >
> > > >
> > > > > > As for the platform.properties file for windows:
> > > > > > The property platform can/should be removed, its not
> necessary.
> > > > > > If
> > >
> > > > > > the property "platform.compiler-definition" is set, then
> > > > > > that value will be used for the compiler selection, else it
> > > > > > will get set to msvc for windows as can be seen on line 18
> > > > > > of
> > > compilers.xml.
> > > > > >
> > > > > > I think the way this should ship is to have several
> > > > > > platform.properties files for the different platform:
> > > > > > platform.properties.linux
> > > > > > platform.properties.windows
> > > > > > platform.properties.mac Which will each have values
> > > > > > pre
>
> > > > > > configured for the corresponding
> >
> > > > > > platform. Then with either configure or a shell script, the
> > > > > > platform
> > > >
> > > > > > file wil be copied to platform.properties and the directory
> > > > > > properties will be set accordingly.
> > > > > >
> > > > > > --------------------
> > > > > > Brady Johnson
> > > > > > Lead Software Developer - HydraSCA Rogue Wave Software -
> > > > > > [EMAIL PROTECTED]
> > > > > >
> > > > > >
> > > > > > -----Original Message-----
> > > > > > From: Pete Robbins [mailto:[EMAIL PROTECTED]
> > > > > > Sent: Wednesday, July 18, 2007 7:08 AM
> > > > > > To: [email protected]
> > > > > > Subject: Re: [SCA Native] preliminary ant build
> > > > > >
> > > > > > I ran into a couple of issues tryingt o run this ant build.
> > > > > > Firstly I got an error with a path
> > > > > > xxxxx/cpp/sca/runtime/core/src/runtime/core/src. I trcked
> > > > > > this
>
> > > > > > down to the fact that the property core.dir is set in the
> > > > > > top level build.xml to "runtime/core/src" and in the
> > > > > > runtime/core/src/build.xml the same property name is used
> > > > > > and set tu
> > > >
> > > > > > "tuscany/sca/core". It looks to me like the second defintion
> > > > > > of core.dir is being ignored. I'm not an ant expert ... do
> > > > > > properties
> > > > get propagated from higher level build files?
> > > > > > I got around this by changing the name of core.dir to
> > > > > > src.dir in
> >
> > > > > > one
> > > >
> > > > > > of the files.
> > > > > >
> > > > > > Rather than specifying the paths to the source code etc in
> > > > > > the
>
> > > > > > platform.properties I would prefer to set these
> > > > > > automatically so
> >
> > > > > > in the top level build.xml I added:
> > > > > >
> > > > > > <property name="tuscanySCA.root.dir" location="$env.PWD}" />
> > > > > >
> > > > > > and then based other properties from this. It seemed to
work!
> > > > > >
> > > > > > Do these changes make sense?
> > > > > >
> > > > > > Cheers,
> > > > > >
> > > > > >
> > > > > > On 18/07/07, Pete Robbins <[EMAIL PROTECTED]> wrote:
> > > > > > > I'd like some info on what I need to edit in the
> > > > platform.properties.
> > > > > > > Particularly:
> > > > > > >
> > > > > > > platform.compiler-definition=g++m32
> > > > > > > platform=rhas4u4_gcc346
> > > > > > >
> > > > > > > One good thing about automake is that it detects your
> > > > > > > platform/compiler etc automatically.
> > > > > > >
> > > > > > > Cheers,
> > > > > > >
> > > > > > >
> > > > > > > On 17/07/07, Brady Johnson <[EMAIL PROTECTED]> wrote:
> > > > > > > >
> > > > > > > > Pete,
> > > > > > > >
> > > > > > > > I put together some documentation for using ant with
> > > > > > > > TuscanySCA
> > > > > > Native.
> > > > > > > >
> > > > > > > > How's this?
> > > > > > > >
> > > > > > > > --------------------
> > > > > > > > Brady Johnson
> > > > > > > > Lead Software Developer - HydraSCA Rogue Wave Software -
> > > > > > > > [EMAIL PROTECTED]
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Using ant to build TuscanySCA Native
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > 1. Required Software to build TuscanySCA Native with
ant:
> > > > > > > >
> > > > > > > > Ant:
> > > > > > > > Ant comes installed with almost all Linux
> > distributions
> > > > > > > > version 1.6 or later
> > > > > > > > Download: http://ant.apache.org/
> > > > > > > >
> > > > > > > > antcontrib:
> > > > > > > > version 1.0b3 or later
> > > > > > > > Download: http://ant-contrib.sourceforge.net/
> > > > > > > >
> > > > > > > > antcontrib cpptasks.jar
> > > > > > > > version 1.0b4 or later
> > > > > > > > Download: http://ant-contrib.sourceforge.net/
> > > > > > > > Information:
> > > > > > > > http://ant-contrib.sourceforge.net/cc.html
> > > > > > > >
> > > > > > > >
> > > > > > > > 2. Installation Instructions:
> > > > > > > >
> > > > > > > > Linux
> > > > > > > > -----
> > > > > > > >
> > > > > > > > Make sure JAVA_HOME is set before starting.
> > > > > > > >
> > > > > > > > Install ant according to
> > > > http://ant.apache.org/manual/index.html.
> > > > > > > >
> > > > > > > > Set the ANT_HOME variable to the directory where you
> > > > > > > > install
> > > > ant.
> > > > > > > > export ANT_HOME="/home/you/ant"
> > > > > > > >
> > > > > > > > Add $ANT_HOME/bin to your path.
> > > > > > > > export PATH="${PATH}:${ANT_HOME}/bin"
> > > > > > > >
> > > > > > > > Optional ant tasks, such as antcontrib and cpptasks,
> > > > > > > > should be
> > >
> > > > > > > > installed in $ANT_HOME/lib So place the antcontrib and
> > > > > > > > cpptasks jars
> > > > > >
> > > > > > > > there.
> > > > > > > >
> > > > > > > > If you dont have write access to $ANT_HOME/lib, do the
> > > > following:
> > > > > > > > - create ${user.home}/.ant/lib
> > > > > > > > - place the jars here
> > > > > > > >
> > > > > > > > Avoid adding optional ant tasks to your classpath, this
> > > > > > > > is
> > > > > > problematic.
> > > > > > > >
> > > > > > > > Windows
> > > > > > > > -------
> > > > > > > >
> > > > > > > > Make sure JAVA_HOME is set before starting.
> > > > > > > >
> > > > > > > > Install ant according to
> > > > http://ant.apache.org/manual/index.html.
> > > > > > > >
> > > > > > > > Set the ANT_HOME variable to the directory where you
> > > > > > > > install
> > > > ant.
> > > > > > > > set ANT_HOME=c:\ant
> > > > > > > >
> > > > > > > > Add %ANT_HOME%\bin to your path.
> > > > > > > > set PATH=%PATH%;%ANT_HOME%\bin
> > > > > > > >
> > > > > > > > Optional ant tasks, such as antcontrib and cpptasks,
> > > > > > > > should be
> > >
> > > > > > > > installed in %ANT_HOME%\lib So place the antcontrib and
> > > > > > > > cpptasks
> > > >
> > > > > > > > jars there.
> > > > > > > >
> > > > > > > > If you dont have write access to %ANT_HOME%\lib, do the
> > > > following:
> > > > > > > > - create ${user.home}\.ant\lib
> > > > > > > > - place the jars here
> > > > > > > >
> > > > > > > > Avoid adding optional ant tasks to your classpath, this
> > > > > > > > is
> > > > > > problematic.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: Pete Robbins [mailto:[EMAIL PROTECTED]
> > > > > > > > Sent: Tuesday, July 17, 2007 1:24 AM
> > > > > > > > To: [email protected]
> > > > > > > > Subject: Re: [SCA Native] preliminary ant build
> > > > > > > >
> > > > > > > > Thanks Brady. I'll take a look at this. We will need doc
> > > > > > > > as to
> > >
> > > > > > > > what the dependencies are (cpptasks etc) and any
> > > > > > > > configuration
> > >
> > > > > > > > that is
> > > > > > needed.
> > > > > > > >
> > > > > > > > Cheers,
> > > > > > > >
> > > > > > > > On 16/07/07, Brady Johnson <[EMAIL PROTECTED]>
wrote:
> > > > > > > > >
> > > > > > > > > For anyone interested, I uploaded another patch for
> > > > > > > > > this
>
> > > > > > > > > JIRA that
> > > > > >
> > > > > > > > > makes it work better for windows.
> > > > > > > > >
> > > > > > > > > tuscanySCAnative_ant_update1.tar.gz
> > > > > > > > >
> > > > > > > > > --------------------
> > > > > > > > > Brady Johnson
> > > > > > > > > Lead Software Developer - HydraSCA Rogue Wave Software
> > > > > > > > > -
>
> > > > > > > > > [EMAIL PROTECTED]
> > > > > > > > > <mailto:[EMAIL PROTECTED]>
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > -----Original Message-----
> > > > > > > > > From: Brady Johnson [mailto:[EMAIL PROTECTED]
> > > > > > > > > Sent: Monday, July 16, 2007 10:46 AM
> > > > > > > > > To: [email protected]
> > > > > > > > > Subject: [SCA Native] preliminary ant build
> > > > > > > > >
> > > > > > > > > Hello,
> > > > > > > > >
> > > > > > > > > This may be the second time you receive this email,
> > > > > > > > > the first time
> > > > > >
> > > > > > > > > I sent it with an attachment, which I later realized
> > > > > > > > > that this
> > > >
> > > > > > > > > dist list
> > > > > > > >
> > > > > > > > > may reject. So here it is again, w/o the attachment. I
> > > > > > > > > created
> > > >
> > > > > > > > > a JIRA and put the attachment there:
> > > > > > > > >
> > > > > > > > > https://issues.apache.org/jira/browse/TUSCANY-1438
> > > > > > > > >
> > > > > > > > > According to a previous thread titled "[SCA Native]
> > > > > > > > > next
>
> > > > > > > > > release content
> > > > > > > > > [was: Tuscany roadmap]" (I didnt want to add another
> "was"
> > > > > > > > > redirection
> > > > > > > > > ;) ), I have prepared ant build scripts for
> > > > cpp/sca/runtime/core.
> > > > > > > > >
> > > > > > > > > The tar.gz file attached to the jira should just
> "overlay"
> > > > > > > > > onto the tuscany SCA cpp source code directory
> structure.
> > > > > > > > > It
> > >
> > > > > > > > > consists of the following files:
> > > > > > > > >
> > > > > > > > > <tuscanySca Native Src dir>/
> > > > > > > > > |
> > > > > > > > > |---- build.xml
> > > > > > > > > |
> > > > > > > > > |---- antscripts/
> > > > > > > > > | |
> > > > > > > > > | |---- compilers.xml
> > > > > > > > > | |---- compile-targets.xml
> > > > > > > > > | |---- platform.properties
> > > > > > > > > |
> > > > > > > > > |---- runtime/core/src/build.xml
> > > > > > > > >
> > > > > > > > > In order to use it, you will need to modify the
> > > > > > > > > platform.properties file. This will later be taken
> > > > > > > > > care of
> >
> > > > > > > > > by either configure, or maybe just an install script.
> > > > > > > > >
> > > > > > > > > Currently it compiles and links
> > > > > > > > > runtime/core/src/tuscany/sca
> > >
> > > > > > > > > {core, extension, model, util} and creates
> > > libtuscany_sca.so.
> > > > > > > > > The install target installs the lib and the headers
> > > > > > > > > from
>
> > > > > > > > > those
> > > >
> > > > > > > > > src directories to the install directory specified in
> > > > > > platform.properties.
> > > > > > > > >
> > > > > > > > > Give it a spin and let me know what you think. It
> > > > > > > > > shouldnt
> >
> > > > > > > > > take much to finish it for the rest of tuscany cpp.
> > > > > > > > >
> > > > > > > > > If it works out, we can then discuss how to configure
> > > > > > > > > platform.properties.
> > > > > > > > >
> > > > > > > > > --------------------
> > > > > > > > > Brady Johnson
> > > > > > > > > Lead Software Developer - HydraSCA Rogue Wave Software
> > > > > > > > > -
>
> > > > > > > > > [EMAIL PROTECTED]
> > > > > > > > > <mailto:[EMAIL PROTECTED]>
> > > > > > > > >
> > > > > > > > > ------------------------------------------------------
> > > > > > > > > --
> > > > > > > > > --
> > > > > > > > > --
> > > > > > > > > --
> > > > > > > > > ----
> > > > > > > > > --- To unsubscribe, e-mail:
> > > > > > > > > [EMAIL PROTECTED]
> > > > > > > > > For additional commands, e-mail:
> > > > > > > > > [EMAIL PROTECTED]
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > Pete
> > > > > > > >
> > > > > > > > --------------------------------------------------------
> > > > > > > > --
> > > > > > > > --
> > > > > > > > --
> > > > > > > > --
> > > > > > > > ----
> > > > > > > > - To unsubscribe, e-mail:
> > > > > > > > [EMAIL PROTECTED]
> > > > > > > > For additional commands, e-mail:
> > > > > > > > [EMAIL PROTECTED]
> > > > > > > >
> > > > > > > >
> > > > > > > > --------------------------------------------------------
> > > > > > > > --
> > > > > > > > --
> > > > > > > > --
> > > > > > > > --
> > > > > > > > ----
> > > > > > > > - To unsubscribe, e-mail:
> > > > > > > > [EMAIL PROTECTED]
> > > > > > > > For additional commands, e-mail:
> > > > > > > > [EMAIL PROTECTED]
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Pete
> > > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Pete
> > > > > >
> > > > > > ------------------------------------------------------------
> > > > > > --
> > > > > > --
> > > > > > --
> > > > > > --
> > > > > > - To unsubscribe, e-mail:
> > > > > > [EMAIL PROTECTED]
> > > > > > For additional commands, e-mail:
> > > > > > [EMAIL PROTECTED]
> > > > > >
> > > > > >
> > > > > > ------------------------------------------------------------
> > > > > > --
> > > > > > --
> > > > > > --
> > > > > > --
> > > > > > - To unsubscribe, e-mail:
> > > > > > [EMAIL PROTECTED]
> > > > > > For additional commands, e-mail:
> > > > > > [EMAIL PROTECTED]
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Pete
> > > > >
> > > >
> > > >
> > > > --
> > > > Pete
> > > >
> > > > ----------------------------------------------------------------
> > > > --
> > > > --
> > > > - To unsubscribe, e-mail: [EMAIL PROTECTED]
> > > > For additional commands, e-mail: [EMAIL PROTECTED]
> > > >
> > > >
> > > > ----------------------------------------------------------------
> > > > --
> > > > --
> > > > - To unsubscribe, e-mail: [EMAIL PROTECTED]
> > > > For additional commands, e-mail: [EMAIL PROTECTED]
> > > >
> > > >
> > >
> > >
> > > --
> > > Pete
> > >
> > > ------------------------------------------------------------------
> > > --
> > > - To unsubscribe, e-mail: [EMAIL PROTECTED]
> > > For additional commands, e-mail: [EMAIL PROTECTED]
> > >
> > >
> > > ------------------------------------------------------------------
> > > --
> > > - To unsubscribe, e-mail: [EMAIL PROTECTED]
> > > For additional commands, e-mail: [EMAIL PROTECTED]
> > >
> > >
> >
> >
> > --
> > Pete
> >
> > --------------------------------------------------------------------
> > - To unsubscribe, e-mail: [EMAIL PROTECTED]
> > For additional commands, e-mail: [EMAIL PROTECTED]
> >
> >
> > --------------------------------------------------------------------
> > - To unsubscribe, e-mail: [EMAIL PROTECTED]
> > For additional commands, e-mail: [EMAIL PROTECTED]
> >
> >
>
>
> --
> Pete
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>
--
Pete
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
