Hi Saifi, I verified the contents of the file.It is different in one place."STARTMODE=off" instead of "auto".
thanks, Swathi. On Tue, Oct 14, 2008 at 3:50 PM, Saifi Khan <[EMAIL PROTECTED]>wrote: > On Thu, 9 Oct 2008, swathi kota wrote: > > > Hi Saifi, > > > > There is again some problem with the network settings.I am unable to > > connect to the net. > > when i typed "service network start" on the terminal it displayed "eth0 > > start mode is off". > > > > In network devices->network settings->overview the following > > message is displayed > > > > - device name:eth0 > > - will not be started at all > > - ip address assigned using dhcp > > > > Hi Swathi: > > On your OpenSuSe 11 system, please goto the > /etc/sysconfig/network/ directory. > > You should be able to locate a file named 'ifcfg-eth0'. > > Please verify whether the contents of the file match > with the ones shown below. > > BOOTPROTO='dhcp' > BROADCAST='' > ETHTOOL_OPTIONS='' > IPADDR='' > MTU='' > NAME='RTL-8139/8139C/8139C+' > NETMASK='' > NETWORK='' > REMOTE_IPADDR='' > STARTMODE='auto' > USERCONTROL='no' > > > If you find any differences, please copy and paste the contents > in your reply. > > > thanks > Saifi. >
