> udp.addr :=ip; What IP address do you use ? It must be either '0.0.0.0' or the IP address of the network interface you want to listen to.
-- [EMAIL PROTECTED] http://www.overbyte.be ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <twsocket@elists.org> Sent: Tuesday, May 03, 2005 5:14 PM Subject: [twsocket] Messages > Hello, > > after sendin I have now (only for test purposes) a 100 ms loop > which calls twsocket's processmessages. The result is, that sending > now works fine again from the test app. and the test app. responds > to mouse clicks etc. again. > > For the receiving part I did this (the contents of tthread execute): > > try > udp:=TWSocket.Create(nil); > udp.addr :=ip; > udp.Port :=port; > udp.Proto :='udp'; > udp.SendFlags :=wsSendNormal; > udp.MultiThreaded :=true; > udp.OnDataAvailable:=dm.udpDataAvailable; > > udp.Listen; > > udp.MessageLoop; > except > exit; > end; > > with dm.udpdataavailable the former dataavailable from the socket which > was placed statically on a datamodule and did formerly the receiving part. > > The thread is started, but can't receive anything. OnDataAvailable doesn't > fire although there is data available. > > What's wrong with it? It seems I'm near the solution, but haven't got it > yet. > > Greetings > > Markus Humm > -- > To unsubscribe or change your settings for TWSocket mailing list > please goto http://www.elists.org/mailman/listinfo/twsocket > Visit our website at http://www.overbyte.be > -- To unsubscribe or change your settings for TWSocket mailing list please goto http://www.elists.org/mailman/listinfo/twsocket Visit our website at http://www.overbyte.be
