[PATCH v5 5/8] clk/qcom: sc7280: add uart5 and uart7 clocks

[Casey Connolly]

Allow us to power up UART7 so we can load the QUP firmware, this is used
for bluetooth on RB3 Gen 2 and possibly other boards.

Additionally add the UART5 clocks so we can adjust baud rate for UART

Signed-off-by: Casey Connolly <casey.conno...@linaro.org>
---
 drivers/clk/qcom/clock-sc7280.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/clk/qcom/clock-sc7280.c b/drivers/clk/qcom/clock-sc7280.c
index 
47e0ca5f0e5ce37b8c0f78f3be32ab9c519e471f..55a233df39450e511aebf7892214967c284a603e
 100644
--- a/drivers/clk/qcom/clock-sc7280.c
+++ b/drivers/clk/qcom/clock-sc7280.c
@@ -37,8 +37,24 @@ static const struct freq_tbl 
ftbl_gcc_usb30_sec_master_clk_src[] = {
        F(120000000, CFG_CLK_SRC_GPLL0_EVEN, 2.5, 0, 0),
        { }
 };
 
+static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s2_clk_src[] = {
+       F(7372800, CFG_CLK_SRC_GPLL0_EVEN, 1, 384, 15625),
+       F(14745600, CFG_CLK_SRC_GPLL0_EVEN, 1, 768, 15625),
+       F(19200000, CFG_CLK_SRC_CXO, 1, 0, 0),
+       F(29491200, CFG_CLK_SRC_GPLL0_EVEN, 1, 1536, 15625),
+       F(32000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 8, 75),
+       F(48000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 4, 25),
+       F(52174000, CFG_CLK_SRC_GPLL0, 1, 2, 23),
+       F(64000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 16, 75),
+       F(75000000, CFG_CLK_SRC_GPLL0_EVEN, 4, 0, 0),
+       F(80000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 4, 15),
+       F(96000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 8, 25),
+       F(100000000, CFG_CLK_SRC_GPLL0, 6, 0, 0),
+       { }
+};
+
 static ulong sc7280_set_rate(struct clk *clk, ulong rate)
 {
        struct msm_clk_priv *priv = dev_get_priv(clk->dev);
        const struct freq_tbl *freq;
@@ -46,8 +62,18 @@ static ulong sc7280_set_rate(struct clk *clk, ulong rate)
        if (clk->id < priv->data->num_clks)
                debug("%s: %s, requested rate=%ld\n", __func__, 
priv->data->clks[clk->id].name, rate);
 
        switch (clk->id) {
+       case GCC_QUPV3_WRAP0_S5_CLK: /* UART5 */
+               freq = qcom_find_freq(ftbl_gcc_qupv3_wrap0_s2_clk_src, rate);
+               clk_rcg_set_rate_mnd(priv->base, 0x17600,
+                                    freq->pre_div, freq->m, freq->n, 
freq->src, 16);
+               return freq->freq;
+       case GCC_QUPV3_WRAP0_S7_CLK: /* UART7 */
+               freq = qcom_find_freq(ftbl_gcc_qupv3_wrap0_s2_clk_src, rate);
+               clk_rcg_set_rate_mnd(priv->base, 0x17860,
+                                    freq->pre_div, freq->m, freq->n, 
freq->src, 16);
+               return freq->freq;
        case GCC_USB30_PRIM_MASTER_CLK:
                freq = qcom_find_freq(ftbl_gcc_usb30_prim_master_clk_src, rate);
                clk_rcg_set_rate_mnd(priv->base, USB30_PRIM_MASTER_CLK_CMD_RCGR,
                                     freq->pre_div, freq->m, freq->n, 
freq->src, 8);
@@ -106,8 +132,10 @@ static const struct gate_clk sc7280_clks[] = {
        GATE_CLK(GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK, 0x52008, BIT(28)),
        GATE_CLK(GCC_QUPV3_WRAP0_S0_CLK, 0x52008, BIT(10)),
        GATE_CLK(GCC_QUPV3_WRAP0_S1_CLK, 0x52008, BIT(11)),
        GATE_CLK(GCC_QUPV3_WRAP0_S3_CLK, 0x52008, BIT(13)),
+       GATE_CLK(GCC_QUPV3_WRAP0_S5_CLK, 0x52008, BIT(15)),
+       GATE_CLK(GCC_QUPV3_WRAP0_S7_CLK, 0x52008, BIT(17)),
        GATE_CLK(GCC_UFS_PHY_AXI_CLK, 0x77010, BIT(0)),
        GATE_CLK(GCC_AGGRE_UFS_PHY_AXI_CLK, 0x770cc, BIT(0)),
        GATE_CLK(GCC_UFS_PHY_AHB_CLK, 0x77018, BIT(0)),
        GATE_CLK(GCC_UFS_PHY_UNIPRO_CORE_CLK, 0x7705c, BIT(0)),

-- 
2.50.0