A few of the platform specific DWC3 host glue drivers cannot build
without access to some platform specific header files. Express those
requirements in Kconfig as well.
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
Cc: Marek Vasut <marek.va...@mailbox.org>
---
drivers/usb/dwc3/Kconfig | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 682a69106556..744dfa90463c 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -17,6 +17,7 @@ comment "Platform Glue Driver Support"
config USB_DWC3_OMAP
bool "Texas Instruments OMAP5 and similar Platforms"
+ depends on ARCH_OMAP2PLUS
help
Some platforms from Texas Instruments like OMAP5, DRA7xxx and
AM437x use this IP for USB2/3 functionality.
@@ -39,14 +40,14 @@ config SPL_USB_DWC3_GENERIC
config SPL_USB_DWC3_AM62
bool "TI AM62 USB wrapper"
- depends on SPL_DM_USB && SPL_USB_DWC3_GENERIC && SPL_SYSCON
+ depends on SPL_DM_USB && SPL_USB_DWC3_GENERIC && SPL_SYSCON && ARCH_K3
help
Select this for TI AM62 Platforms.
This wrapper supports Host and Peripheral operation modes.
config USB_DWC3_AM62
bool "TI AM62 USB wrapper"
- depends on DM_USB && USB_DWC3_GENERIC && SYSCON
+ depends on DM_USB && USB_DWC3_GENERIC && SYSCON && ARCH_K3
help
Select this for TI AM62 Platforms.
This wrapper supports Host and Peripheral operation modes.
@@ -80,7 +81,7 @@ config USB_DWC3_UNIPHIER
config USB_DWC3_LAYERSCAPE
bool "Freescale Layerscape platform support"
depends on DM_USB && USB_DWC3
- depends on !USB_XHCI_FSL
+ depends on !USB_XHCI_FSL && ARM
help
Select this for Freescale Layerscape Platforms.
@@ -99,12 +100,14 @@ menu "PHY Subsystem"
config USB_DWC3_PHY_OMAP
bool "TI OMAP SoC series USB DRD PHY driver"
+ depends on ARCH_OMAP2PLUS
help
Enable single driver for both USB2 PHY programming and USB3 PHY
programming for TI SoCs.
config USB_DWC3_PHY_SAMSUNG
bool "Exynos5 SoC series USB DRD PHY driver"
+ depends on ARCH_EXYNOS
help
Enable USB DRD PHY support for Exynos 5 SoC series.
This driver provides PHY interface for USB 3.0 DRD controller
--
2.43.0
