This driver is unused. Remove it.
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
Cc: Marek Vasut <marek.va...@mailbox.org>
Cc: Lukasz Majewski <lu...@denx.de>
Cc: Mattijs Korpershoek <mkorpersh...@kernel.org>
---
drivers/usb/gadget/Kconfig | 5 ---
drivers/usb/gadget/Makefile | 1 -
drivers/usb/gadget/bcm_udc_otg.h | 19 ----------
drivers/usb/gadget/bcm_udc_otg_phy.c | 54 ----------------------------
4 files changed, 79 deletions(-)
delete mode 100644 drivers/usb/gadget/bcm_udc_otg.h
delete mode 100644 drivers/usb/gadget/bcm_udc_otg_phy.c
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index bc6ce6ec8776..37c516abcd5a 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -98,11 +98,6 @@ config USB_GADGET_ATMEL_USBA
USBA is the integrated high-speed USB Device controller on
the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
-config USB_GADGET_BCM_UDC_OTG_PHY
- bool "Broadcom UDC OTG PHY"
- help
- Enable the Broadcom UDC OTG physical device interface.
-
config USB_GADGET_AT91
bool "Atmel AT91 USB Gadget Controller"
depends on ARCH_AT91
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index db5f8895a33a..7af5f6e6d634 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -17,7 +17,6 @@ endif
ifdef CONFIG_USB_GADGET
obj-$(CONFIG_USB_GADGET_AT91) += at91_udc.o
obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o
-obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o
obj-$(CONFIG_USB_GADGET_DWC2_OTG) += dwc2_udc_otg.o
obj-$(CONFIG_USB_GADGET_DWC2_OTG_PHY) += dwc2_udc_otg_phy.o
obj-$(CONFIG_USB_GADGET_MAX3420) += max3420_udc.o
diff --git a/drivers/usb/gadget/bcm_udc_otg.h b/drivers/usb/gadget/bcm_udc_otg.h
deleted file mode 100644
index 48370f37d8a2..000000000000
--- a/drivers/usb/gadget/bcm_udc_otg.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2015 Broadcom Corporation.
- */
-
-#ifndef __BCM_UDC_OTG_H
-#define __BCM_UDC_OTG_H
-
-static inline void wfld_set(uintptr_t addr, uint32_t fld_val, uint32_t
fld_mask)
-{
- writel(((readl(addr) & ~(fld_mask)) | (fld_val)), (addr));
-}
-
-static inline void wfld_clear(uintptr_t addr, uint32_t fld_mask)
-{
- writel((readl(addr) & ~(fld_mask)), (addr));
-}
-
-#endif
diff --git a/drivers/usb/gadget/bcm_udc_otg_phy.c
b/drivers/usb/gadget/bcm_udc_otg_phy.c
deleted file mode 100644
index 9875191091cc..000000000000
--- a/drivers/usb/gadget/bcm_udc_otg_phy.c
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2015 Broadcom Corporation.
- */
-
-#include <config.h>
-#include <asm/io.h>
-#include <asm/arch/sysmap.h>
-#include <asm/kona-common/clk.h>
-#include <linux/delay.h>
-
-#include "dwc2_udc_otg_priv.h"
-#include "bcm_udc_otg.h"
-
-void otg_phy_init(struct dwc2_udc *dev)
-{
- /* turn on the USB OTG clocks */
- clk_usb_otg_enable((void *)HSOTG_BASE_ADDR);
-
- /* set Phy to driving mode */
- wfld_clear(HSOTG_CTRL_BASE_ADDR + HSOTG_CTRL_PHY_P1CTL_OFFSET,
- HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK);
-
- udelay(100);
-
- /* clear Soft Disconnect */
- wfld_clear(HSOTG_BASE_ADDR + HSOTG_DCTL_OFFSET,
- HSOTG_DCTL_SFTDISCON_MASK);
-
- /* invoke Reset (active low) */
- wfld_clear(HSOTG_CTRL_BASE_ADDR + HSOTG_CTRL_PHY_P1CTL_OFFSET,
- HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK);
-
- /* Reset needs to be asserted for 2ms */
- udelay(2000);
-
- /* release Reset */
- wfld_set(HSOTG_CTRL_BASE_ADDR + HSOTG_CTRL_PHY_P1CTL_OFFSET,
- HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK,
- HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK);
-}
-
-void otg_phy_off(struct dwc2_udc *dev)
-{
- /* Soft Disconnect */
- wfld_set(HSOTG_BASE_ADDR + HSOTG_DCTL_OFFSET,
- HSOTG_DCTL_SFTDISCON_MASK,
- HSOTG_DCTL_SFTDISCON_MASK);
-
- /* set Phy to non-driving (reset) mode */
- wfld_set(HSOTG_CTRL_BASE_ADDR + HSOTG_CTRL_PHY_P1CTL_OFFSET,
- HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK,
- HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK);
-}
--
2.43.0
