Dne petek, 1. avgust 2025 ob 02:27:26 Srednjeevropski poletni čas je Andre Przywara napisal(a): > The first of the two Ethernet controllers in the Allwinner A527/T527 is > compatible to the MAC from the previous SoCs. Consequently the recent DT > update brought use the MAC node, using the A64 compatible string as the > fallback, which works out of the box. > > Enable the sun8i-emac Ethernet driver in the defconfig for the Radxa and > the Avaota boards, so that kernels and other data can be loaded via > TFTP. Please note that only one of the Ethernet sockets will work, the > second MAC is not compatible, and needs a new U-Boot driver. The > X96QPro+ TV box unfortunately uses only this second EMAC, so Ethernet > cannot be used there at the moment. > > Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skra...@gmail.com> Best regards, Jernej > --- > configs/avaota-a1_defconfig | 2 ++ > configs/radxa-cubie-a5e_defconfig | 2 ++ > 2 files changed, 4 insertions(+) > > diff --git a/configs/avaota-a1_defconfig b/configs/avaota-a1_defconfig > index 55457edd3b3..a4582c00d5b 100644 > --- a/configs/avaota-a1_defconfig > +++ b/configs/avaota-a1_defconfig > @@ -22,6 +22,8 @@ CONFIG_SYS_I2C_MVTWSI=y > CONFIG_SYS_I2C_SLAVE=0x7f > CONFIG_SYS_I2C_SPEED=400000 > CONFIG_SUPPORT_EMMC_BOOT=y > +CONFIG_PHY_REALTEK=y > +CONFIG_SUN8I_EMAC=y > CONFIG_REGULATOR_AXP=y > CONFIG_AXP717_POWER=y > CONFIG_AXP_I2C_ADDRESS=0x35 > diff --git a/configs/radxa-cubie-a5e_defconfig > b/configs/radxa-cubie-a5e_defconfig > index 88019acf576..9d204ef5548 100644 > --- a/configs/radxa-cubie-a5e_defconfig > +++ b/configs/radxa-cubie-a5e_defconfig > @@ -22,6 +22,8 @@ CONFIG_SYS_I2C_MVTWSI=y > CONFIG_SYS_I2C_SLAVE=0x7f > CONFIG_SYS_I2C_SPEED=400000 > CONFIG_SUPPORT_EMMC_BOOT=y > +CONFIG_PHY_REALTEK=y > +CONFIG_SUN8I_EMAC=y > CONFIG_REGULATOR_AXP=y > CONFIG_AXP717_POWER=y > CONFIG_AXP_DCDC2_VOLT=920 >
