u-boot  

Messages by Thread

• • Re: [PATCH] board: ti: am62ax: env: Use default MMC related args Neha Malcom Francis
  • Re: [PATCH] board: ti: am62ax: env: Use default MMC related args Chirag Shilwant
  • Re: [PATCH] board: ti: am62ax: env: Use default MMC related args Mendez, Judith
• [PATCH v1] ti: k3: abstract common fdt api for reserved mem fixups Anshul Dalal
• [PATCH v2] mmc: am654_sdhci: Clear UHS_MODE_SELECT when <= MMC_HS_52 Judith Mendez
• [PATCH v1 0/4] Add SD card support to the Beagle-V-Fire Eoin Dickson
  • Re: [PATCH v1 0/4] Add SD card support to the Beagle-V-Fire Conor.Dooley
  • Re: [PATCH v1 0/4] Add SD card support to the Beagle-V-Fire Robert Nelson
  • [PATCH v1 2/4] spi: coreqspi: add xfer function for PolarFire SoC Eoin Dickson
  • [PATCH v1 3/4] configs: beaglev_fire: Enable GPIO and MMC_SPI Eoin Dickson
  • [PATCH v1 1/4] gpio: add PolarFire SoC GPIO and Core GPIO driver Eoin Dickson
  • [PATCH v1 4/4] riscv: dts: microchip: enable gpio banks in Beagle-V Fire Eoin Dickson
• [GIT PULL] Please pull u-boot-imx-master-20250522 Fabio Estevam
  • Re: [GIT PULL] Please pull u-boot-imx-master-20250522 Tom Rini
• [PATCH RFT v4 0/3] fastboot: add support for generic block flashing Neil Armstrong
  • [PATCH RFT v4 1/3] fastboot: blk: introduce fastboot block flashing support Neil Armstrong
  • [PATCH RFT v4 3/3] fastboot: integrate block flashing back-end Neil Armstrong
  • Re: [PATCH RFT v4 3/3] fastboot: integrate block flashing back-end Tom Rini
  • [PATCH RFT v4 2/3] fastboot: blk: switch emmc to use the block helpers Neil Armstrong
  • Re: [PATCH RFT v4 2/3] fastboot: blk: switch emmc to use the block helpers Tom Rini
• [PATCH v1] mach-k3: am62ax: enable caches for the SPL stage Anshul Dalal
• [PATCH v3] phy: zynqmp: Fix sgmii clk ctrl GTR lane bit shift Frantisek Bohacek
  • Re: [PATCH v3] phy: zynqmp: Fix sgmii clk ctrl GTR lane bit shift Michal Simek
• [PATCH 0/6] Add IPC support on MCU R5F cluster in Split Mode Beleswar Padhi
  • [PATCH 2/6] arch: mach-k3: common: Add support to shutdown MCU R5 Core 1 Beleswar Padhi
  • Re: [PATCH 2/6] arch: mach-k3: common: Add support to shutdown MCU R5 Core 1 Neha Malcom Francis
  • Re: [PATCH 2/6] arch: mach-k3: common: Add support to shutdown MCU R5 Core 1 Beleswar Prasad Padhi
  • [PATCH 3/6] remoteproc: k3-r5: Acquire processor control before reset ops Beleswar Padhi
  • Re: [PATCH 3/6] remoteproc: k3-r5: Acquire processor control before reset ops Neha Malcom Francis
  • [PATCH 4/6] board: ti: j7*: Add firmware for MCU R5 core1 Beleswar Padhi
  • Re: [PATCH 4/6] board: ti: j7*: Add firmware for MCU R5 core1 Neha Malcom Francis
  • [PATCH 5/6] arm: dts: k3-j7*-binman: Enable split mode for MCU R5F Beleswar Padhi
  • Re: [PATCH 5/6] arm: dts: k3-j7*-binman: Enable split mode for MCU R5F Neha Malcom Francis
  • [PATCH 1/6] arm: mach-k3: {am6/j7}*_hardware.h: Expose MCU R5 proc and device ids Beleswar Padhi
  • Re: [PATCH 1/6] arm: mach-k3: {am6/j7}*_hardware.h: Expose MCU R5 proc and device ids Neha Malcom Francis
  • [PATCH 6/6] DONOTMERGE: arm: dts: k3-j7*-mcu-wakeup: Enable split mode for MCU R5 Beleswar Padhi
  • Re: [PATCH 6/6] DONOTMERGE: arm: dts: k3-j7*-mcu-wakeup: Enable split mode for MCU R5 Beleswar Prasad Padhi
  • Re: [PATCH 6/6] DONOTMERGE: arm: dts: k3-j7*-mcu-wakeup: Enable split mode for MCU R5 Tom Rini
  • Re: [PATCH 6/6] DONOTMERGE: arm: dts: k3-j7*-mcu-wakeup: Enable split mode for MCU R5 Nishanth Menon
  • Re: [PATCH 6/6] DONOTMERGE: arm: dts: k3-j7*-mcu-wakeup: Enable split mode for MCU R5 Beleswar Prasad Padhi
  • Re: [PATCH 6/6] DONOTMERGE: arm: dts: k3-j7*-mcu-wakeup: Enable split mode for MCU R5 Nishanth Menon
  • Re: [PATCH 6/6] DONOTMERGE: arm: dts: k3-j7*-mcu-wakeup: Enable split mode for MCU R5 Tom Rini
  • Re: [PATCH 6/6] DONOTMERGE: arm: dts: k3-j7*-mcu-wakeup: Enable split mode for MCU R5 Nishanth Menon
  • Re: [PATCH 6/6] DONOTMERGE: arm: dts: k3-j7*-mcu-wakeup: Enable split mode for MCU R5 Tom Rini
  • Re: [PATCH 6/6] DONOTMERGE: arm: dts: k3-j7*-mcu-wakeup: Enable split mode for MCU R5 Beleswar Prasad Padhi
• [PATCH v3 0/4] Add EFI Debug Support Table feature Ying-Chun Liu (PaulLiu)
  • [PATCH v3 1/4] efi: add EFI_SYSTEM_TABLE_POINTER for debug Ying-Chun Liu (PaulLiu)
  • Re: [PATCH v3 1/4] efi: add EFI_SYSTEM_TABLE_POINTER for debug Heinrich Schuchardt
  • Re: [PATCH v3 1/4] efi: add EFI_SYSTEM_TABLE_POINTER for debug Ilias Apalodimas
  • Re: [PATCH v3 1/4] efi: add EFI_SYSTEM_TABLE_POINTER for debug Paul Liu
  • [PATCH v3 4/4] efi: add EFI_DEBUG_IMAGE_INFO for debug Ying-Chun Liu (PaulLiu)
  • [PATCH v3 2/4] efi: add EFI_DEBUG_IMAGE_INFO_TABLE for debug Ying-Chun Liu (PaulLiu)
  • [PATCH v3 3/4] lib: efi_loader: efi_memory.c: add efi_realloc() for realloc memory Ying-Chun Liu (PaulLiu)
  • Re: [PATCH v3 3/4] lib: efi_loader: efi_memory.c: add efi_realloc() for realloc memory Simon Glass
  • Re: [PATCH v3 3/4] lib: efi_loader: efi_memory.c: add efi_realloc() for realloc memory Paul Liu
  • Re: [PATCH v3 3/4] lib: efi_loader: efi_memory.c: add efi_realloc() for realloc memory Paul Liu
  • Re: [PATCH v3 3/4] lib: efi_loader: efi_memory.c: add efi_realloc() for realloc memory Simon Glass
  • Re: [PATCH v3 3/4] lib: efi_loader: efi_memory.c: add efi_realloc() for realloc memory Ilias Apalodimas
• [PATCH 00/17] Audit include list for include/[a-m]*.h Tom Rini
  • [PATCH 03/17] include/bios_emul.h: Audit include list Tom Rini
  • [PATCH 05/17] include/bootstd.h: Audit include list Tom Rini
  • [PATCH 07/17] include/cbfs.h: Audit include list Tom Rini
  • [PATCH 08/17] include/compiler.h: Audit include list Tom Rini
  • [PATCH 09/17] include/dfu.h: Audit include list Tom Rini
  • Re: [PATCH 09/17] include/dfu.h: Audit include list Mattijs Korpershoek
  • [PATCH 10/17] include/dw_hdmi.h: Audit include list Tom Rini
  • [PATCH 12/17] include/efi_loader.h, include/efi_tcg2.h: Audit include list Tom Rini
  • Re: [PATCH 12/17] include/efi_loader.h, include/efi_tcg2.h: Audit include list Ilias Apalodimas
  • [PATCH 14/17] include/ide.h: Cleanup usage Tom Rini
  • [PATCH 15/17] include/mmc.h: Audit include list Tom Rini
  • [PATCH 16/17] include/mtd.h: Cleanup usage Tom Rini
  • [PATCH 17/17] global: Cleanup usage of "ETH_ALEN" Tom Rini
  • [PATCH 06/17] include/cadence-nand.h: Audit include list Tom Rini
  • [PATCH 13/17] include/fat.h: Audit include list Tom Rini
  • [PATCH 11/17] include/dwmmc.h: Audit include list Tom Rini
  • [PATCH 04/17] include/bootflow.h: Audit include list Tom Rini
  • [PATCH 02/17] include/arm_ffa.h: Audit include list Tom Rini
  • [PATCH 01/17] include/ahci.h: Audit include list Tom Rini
• [PATCH] image: android: fix ramdisk default address Eddie Kovsky
• [PATCH v2] phy: zynqmp: Fix sgmii clk ctrl GTR lane bit shift Rutherther
  • Re: [PATCH v2] phy: zynqmp: Fix sgmii clk ctrl GTR lane bit shift Michal Simek
  • Re: [PATCH v2] phy: zynqmp: Fix sgmii clk ctrl GTR lane bit shift Rutherther
  • Re: [PATCH v2] phy: zynqmp: Fix sgmii clk ctrl GTR lane bit shift Michal Simek
  • Re: [PATCH v2] phy: zynqmp: Fix sgmii clk ctrl GTR lane bit shift Rutherther
• [PATCH v1 00/13] stm32mp25: Add clock and reset drivers support Patrice Chotard
  • [PATCH v1 02/13] clk: stm32mp25: Add clock driver support Patrice Chotard
  • Re: [PATCH v1 02/13] clk: stm32mp25: Add clock driver support Gabriel FERNANDEZ
  • Re: [PATCH v1 02/13] clk: stm32mp25: Add clock driver support Patrice CHOTARD
  • [PATCH v1 10/13] clk: stm32: fix clock counter Patrice Chotard
  • [PATCH v1 09/13] phy: stm32-usbphyc: manage properly the clk identifier with CCF Patrice Chotard
  • [PATCH v1 01/13] clk: scmi: add compatibility with clock protocol 2.0 Patrice Chotard
  • [PATCH v1 05/13] clk: sandbox: update driver for CONFIG_CLK_AUTO_ID support Patrice Chotard
  • [PATCH v1 13/13] configs: stm32mp25: increase SYS_MALLOC_F_LEN to 0x60000 Patrice Chotard
  • [PATCH v1 08/13] clk: scmi: manage properly the clk identifier with CCF Patrice Chotard
  • [PATCH v1 04/13] clk: add CONFIG_CLK_AUTO_ID Patrice Chotard
  • [PATCH v1 11/13] reset: stm32mp25: add stm32mp25 reset driver Patrice Chotard
  • Re: [PATCH v1 11/13] reset: stm32mp25: add stm32mp25 reset driver Gabriel FERNANDEZ
  • Re: [PATCH v1 11/13] reset: stm32mp25: add stm32mp25 reset driver Patrice CHOTARD
  • [PATCH v1 06/13] sandbox: test: update for CONFIG_CLK_AUTO_ID support Patrice Chotard
  • [PATCH v1 07/13] clk: fixed_rate: configure clock ID with CONFIG_CLK_AUTO_ID Patrice Chotard
  • [PATCH v1 03/13] clk: stm32mp25: implement clock check security function Patrice Chotard
  • [PATCH v1 12/13] ARM: dts: stm32: switch from fixed to scmi clocks for stm32mp257f-ev1 Patrice Chotard
• [PATCH 0/3] sntp for NET_LWIP Jerome Forissier
  • [PATCH 3/3] configs: qemu_arm64_lwip_defconfig: enable CMD_SNTP Jerome Forissier
  • [PATCH 1/3] net: extract function net_sntp_set_rtc() from sntp_handler() Jerome Forissier
  • [PATCH 2/3] net: lwip: add sntp command Jerome Forissier
• Re: [PATCH v2] usb: onboard-hub: Fix return type for regulator APIs Michal Simek
• [PATCH 0/4] watchdog for STM32MP family Antonio Borneo
  • [PATCH 4/4] watchdog: don't autostart watchdog on STM32MP boards Antonio Borneo
  • Re: [PATCH 4/4] watchdog: don't autostart watchdog on STM32MP boards Patrick DELAUNAY
  • Re: [PATCH 4/4] watchdog: don't autostart watchdog on STM32MP boards Antonio Borneo
  • [PATCH 1/4] watchdog: wdt-uclass.c: add wdt_set_force_autostart() helper Antonio Borneo
  • [PATCH 3/4] watchdog: stm32mp: check the watchdog status Antonio Borneo
  • [PATCH 2/4] watchdog: arm_smc_wdt: get wdt status through SMCWD_GET_TIMELEFT Antonio Borneo
  • [PATCH v2 0/4] watchdog for STM32MP family Antonio Borneo
  • [PATCH v2 2/4] watchdog: arm_smc_wdt: get wdt status through SMCWD_GET_TIMELEFT Antonio Borneo
  • Re: [PATCH v2 2/4] watchdog: arm_smc_wdt: get wdt status through SMCWD_GET_TIMELEFT Patrice CHOTARD
  • [PATCH v2 4/4] watchdog: don't autostart watchdog on STM32MP architecture Antonio Borneo
  • Re: [PATCH v2 4/4] watchdog: don't autostart watchdog on STM32MP architecture Patrice CHOTARD
  • [PATCH v2 1/4] watchdog: wdt-uclass.c: add wdt_set_force_autostart() helper Antonio Borneo
  • Re: [PATCH v2 1/4] watchdog: wdt-uclass.c: add wdt_set_force_autostart() helper Patrice CHOTARD
  • [PATCH v2 3/4] watchdog: stm32mp: check the watchdog status Antonio Borneo
  • Re: [PATCH v2 3/4] watchdog: stm32mp: check the watchdog status Patrice CHOTARD
• [PATCH v3 0/4] mkimage: validate image references in FIT configurations Aristo Chen
  • [PATCH v3 2/4] tools: mkimage: validate image references in FIT configurations Aristo Chen
  • [PATCH v3 1/4] tools: mkimage: propagate error codes from fit_handle_file() Aristo Chen
  • [PATCH v3 3/4] binman: test: Ensure all config references exist in /images node Aristo Chen
  • [PATCH v3 4/4] test: py: add mkimage test for undefined image references in FIT configs Aristo Chen
• Save sspi output bytes in variable Valentina Skorpion
• [PATCH] caam: Fix CAAM error on startup Fabio Estevam
  • Re: [PATCH] caam: Fix CAAM error on startup Fabio Estevam
• [GIT PULL] u-boot-riscv/master Leo Liang
  • Re: [GIT PULL] u-boot-riscv/master Tom Rini
  • Re: [GIT PULL] u-boot-riscv/master Conor Dooley
  • Re: [GIT PULL] u-boot-riscv/master Tom Rini
  • Re: [GIT PULL] u-boot-riscv/master Leo Liang
  • Re: [GIT PULL] u-boot-riscv/master Tom Rini
  • Re: [GIT PULL] u-boot-riscv/master Yao Zi
  • Re: [GIT PULL] u-boot-riscv/master Conor Dooley
  • Re: [GIT PULL] u-boot-riscv/master Mayuresh Chitale
  • Re: [GIT PULL] u-boot-riscv/master Conor Dooley
  • Re: [GIT PULL] u-boot-riscv/master Tom Rini
  • Re: [GIT PULL] u-boot-riscv/master Mayuresh Chitale
  • Re: [GIT PULL] u-boot-riscv/master Tom Rini
  • Re: [GIT PULL] u-boot-riscv/master Mayuresh Chitale
  • Re: [GIT PULL] u-boot-riscv/master Tom Rini
• [PATCH v3 1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table Dario Binacchi
  • [PATCH v3 3/4] board: bsh: imx6ulz_smm_m2: Add support for 512 MiB DRAM Dario Binacchi
  • [PATCH v3 2/4] board: bsh: imx6ulz_smm_m2: Add support for 256 MiB DRAM Dario Binacchi
  • [PATCH v3 4/4] board: bsh: imx6ulz_smm_m2: Add delay between DRAM read access Dario Binacchi
  • Re: [PATCH v3 1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table Fabio Estevam
• [PATCH v3 0/6] Introduce support for QCS8300 SoC based IQ8 Series Platform Balaji Selvanathan
  • [PATCH v3 1/6] doc: board: qualcomm: document Dragonwing board building/flashing Balaji Selvanathan
  • Re: [PATCH v3 1/6] doc: board: qualcomm: document Dragonwing board building/flashing Casey Connolly
  • Re: [PATCH v3 1/6] doc: board: qualcomm: document Dragonwing board building/flashing Balaji Selvanathan
  • [PATCH v3 2/6] dts: qcs8300-ride-u-boot.dtsi: Add memory entry to bootup Balaji Selvanathan
  • [PATCH v3 3/6] clk/qcom: qcs8300: Add GCC clock driver for QCS8300 Balaji Selvanathan
  • [PATCH v3 6/6] configs: add qcs8300_defconfig Balaji Selvanathan
  • Re: [PATCH v3 6/6] configs: add qcs8300_defconfig Casey Connolly
  • [PATCH v3 5/6] qcom_defconfig: Enable QCS8300 clock driver Balaji Selvanathan
  • [PATCH v3 4/6] phy: qcom: Enable QMP UFS PHY driver for QCS8300 Balaji Selvanathan
• Please pull net-20250520 Jerome Forissier
  • Re: Please pull net-20250520 Tom Rini
• QEMU & KVM broken for arm64 Ilias Apalodimas
  • Re: QEMU & KVM broken for arm64 Ilias Apalodimas
  • Re: QEMU & KVM broken for arm64 Mikko Rapeli
  • Re: QEMU & KVM broken for arm64 Mark Kettenis
  • Re: QEMU & KVM broken for arm64 Ilias Apalodimas
  • Re: QEMU & KVM broken for arm64 Simon Glass
  • Re: QEMU & KVM broken for arm64 Simon Glass
• [PATCH v1] arm: mach-k3: j784s4: Call do_board_detect() before DDR probing Emanuele Ghidoli
• [PATCH v2 0/5] Introduce support for QCS615 SoC based Platform Aswin Murugan
  • [PATCH v2 2/5] phy: qcom: Enable QMP UFS PHY driver for QCS615 Aswin Murugan
  • [PATCH v2 3/5] clk/qcom: qcs615: Add GCC clock driver for QCS615 Aswin Murugan
  • [PATCH v2 4/5] qcom_defconfig: Enable QCS615 clock driver Aswin Murugan
  • [PATCH v2 5/5] configs: add qcs615_defconfig Aswin Murugan
  • [PATCH v2 1/5] dts: qcs615-ride-u-boot.dtsi: Add memory entry to bootup Aswin Murugan
• [PATCH 0/1] fs: fs_devread should log error when read outside partition Tony Dinh
  • [PATCH 1/1] fs: fs_devread should log error when read outside partition Tony Dinh
  • Re: [PATCH 1/1] fs: fs_devread should log error when read outside partition Tom Rini
• [PATCH] mmc: am654_sdhci: Clear UHS_MODE_SELECT when < MMC_HS_52 Judith Mendez
  • RE: [PATCH] mmc: am654_sdhci: Clear UHS_MODE_SELECT when < MMC_HS_52 Peng Fan
  • Re: [PATCH] mmc: am654_sdhci: Clear UHS_MODE_SELECT when < MMC_HS_52 Judith Mendez
• [PATCH v2] bootm: Fix bmi->images pointer not initialized in some cases Benjamin ROBIN
  • Re: [PATCH v2] bootm: Fix bmi->images pointer not initialized in some cases Tom Rini
  • Re: [PATCH v2] bootm: Fix bmi->images pointer not initialized in some cases Simon Glass
  • Re: [PATCH v2] bootm: Fix bmi->images pointer not initialized in some cases Tom Rini
• [PATCH] dtc: Add Kconfig option to pad device tree blob Eric Schikschneit
• [PATCH v2 1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table Dario Binacchi
  • [PATCH v2 3/4] board: bsh: imx6ulz_smm_m2: Add support for 512 MiB DRAM Dario Binacchi
  • [PATCH v2 4/4] board: bsh: imx6ulz_smm_m2: Add delay between DRAM read access Dario Binacchi
  • [PATCH v2 2/4] board: bsh: imx6ulz_smm_m2: Add support for 256 MiB DRAM Dario Binacchi
  • Re: [PATCH v2 1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table Michael Nazzareno Trimarchi
• [PATCH v3 0/5] Restore imx8mn_bsh_smm_s2 properly booting Dario Binacchi
  • [PATCH v3 1/5] spl: Kconfig: support U-Boot load from raw NAND Dario Binacchi
  • [PATCH v3 2/5] imx: spl_imx_romapi: support raw NAND sector Dario Binacchi
  • [PATCH v3 4/5] board: bsh: imx8mn_bsh_smm_s2/s2pro: enlarge CONFIG_SPL_SYS_MALLOC_F_LEN Dario Binacchi
  • Re: [PATCH v3 4/5] board: bsh: imx8mn_bsh_smm_s2/s2pro: enlarge CONFIG_SPL_SYS_MALLOC_F_LEN Fabio Estevam
  • [PATCH v3 5/5] board: bsh: imx8mn_bsh_smm_s2/s2pro: let clock system enable UART clock Dario Binacchi
  • [PATCH v3 3/5] configs: imx8mn_bsh_smm_s2: load U-Boot from raw NAND Dario Binacchi

• Earlier messages
• Later messages