Imply OF_UPSTREAM in platform Kconfig option and adapt existing boards
to use the correct upstream devicetree paths.

Signed-off-by: Yao Zi <zi...@disroot.org>
---
 arch/riscv/cpu/th1520/Kconfig                 |   1 +
 arch/riscv/dts/Makefile                       |   1 -
 .../dts/th1520-lichee-module-4a-u-boot.dtsi   |  10 +
 arch/riscv/dts/th1520-lichee-module-4a.dtsi   | 164 ------
 .../riscv/dts/th1520-lichee-pi-4a-u-boot.dtsi |  27 +
 arch/riscv/dts/th1520-lichee-pi-4a.dts        |  33 --
 arch/riscv/dts/th1520-u-boot.dtsi             |  44 ++
 arch/riscv/dts/th1520.dtsi                    | 530 ------------------
 configs/th1520_lpi4a_defconfig                |   2 +-
 9 files changed, 83 insertions(+), 729 deletions(-)
 create mode 100644 arch/riscv/dts/th1520-lichee-module-4a-u-boot.dtsi
 delete mode 100644 arch/riscv/dts/th1520-lichee-module-4a.dtsi
 create mode 100644 arch/riscv/dts/th1520-lichee-pi-4a-u-boot.dtsi
 delete mode 100644 arch/riscv/dts/th1520-lichee-pi-4a.dts
 create mode 100644 arch/riscv/dts/th1520-u-boot.dtsi
 delete mode 100644 arch/riscv/dts/th1520.dtsi

diff --git a/arch/riscv/cpu/th1520/Kconfig b/arch/riscv/cpu/th1520/Kconfig
index c73462c04b8..a02f5f24906 100644
--- a/arch/riscv/cpu/th1520/Kconfig
+++ b/arch/riscv/cpu/th1520/Kconfig
@@ -21,3 +21,4 @@ config THEAD_TH1520
        imply SPL_CPU
        imply SPL_OPENSBI
        imply SPL_LOAD_FIT
+       imply OF_UPSTREAM
diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile
index 2b10c2d6c01..1b2e8dd3d4e 100644
--- a/arch/riscv/dts/Makefile
+++ b/arch/riscv/dts/Makefile
@@ -11,7 +11,6 @@ dtb-$(CONFIG_TARGET_OPENPITON_RISCV64) += 
openpiton-riscv64.dtb
 dtb-$(CONFIG_TARGET_SIFIVE_UNLEASHED) += hifive-unleashed-a00.dtb
 dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive-unmatched-a00.dtb
 dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb
-dtb-$(CONFIG_TARGET_TH1520_LPI4A) += th1520-lichee-pi-4a.dtb
 dtb-$(CONFIG_TARGET_XILINX_MBV) += xilinx-mbv32.dtb
 dtb-$(CONFIG_TARGET_XILINX_MBV) += xilinx-mbv64.dtb
 dtb-$(CONFIG_TARGET_ASPEED_AST2700_IBEX) += ast2700-ibex.dtb
diff --git a/arch/riscv/dts/th1520-lichee-module-4a-u-boot.dtsi 
b/arch/riscv/dts/th1520-lichee-module-4a-u-boot.dtsi
new file mode 100644
index 00000000000..bbfa3c499cf
--- /dev/null
+++ b/arch/riscv/dts/th1520-lichee-module-4a-u-boot.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Yao Zi <zi...@disroot.org>
+ */
+
+#include "th1520-u-boot.dtsi"
+
+&{/memory@0} {
+       bootph-pre-ram;
+};
diff --git a/arch/riscv/dts/th1520-lichee-module-4a.dtsi 
b/arch/riscv/dts/th1520-lichee-module-4a.dtsi
deleted file mode 100644
index eecd3e9832a..00000000000
--- a/arch/riscv/dts/th1520-lichee-module-4a.dtsi
+++ /dev/null
@@ -1,164 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2023 Jisheng Zhang <jszh...@kernel.org>
- */
-
-/dts-v1/;
-
-#include "th1520.dtsi"
-
-/ {
-       model = "Sipeed Lichee Module 4A";
-       compatible = "sipeed,lichee-module-4a", "thead,th1520";
-
-       aliases {
-               ethernet0 = &gmac0;
-               ethernet1 = &gmac1;
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x00000000 0x2 0x00000000>;
-               bootph-pre-ram;
-       };
-};
-
-&osc {
-       clock-frequency = <24000000>;
-};
-
-&osc_32k {
-       clock-frequency = <32768>;
-};
-
-&emmc {
-       bus-width = <8>;
-       max-frequency = <198000000>;
-       mmc-ddr-1_8v;
-       mmc-hs400-1_8v;
-       mmc-hs400-enhanced-strobe;
-       non-removable;
-       no-sdio;
-       no-sd;
-       status = "okay";
-};
-
-&gmac0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&gmac0_pins>, <&mdio0_pins>;
-       phy-handle = <&phy0>;
-       phy-mode = "rgmii-id";
-       status = "okay";
-};
-
-&gmac1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&gmac1_pins>;
-       phy-handle = <&phy1>;
-       phy-mode = "rgmii-id";
-       status = "okay";
-};
-
-&mdio0 {
-       phy0: ethernet-phy@1 {
-               reg = <1>;
-       };
-
-       phy1: ethernet-phy@2 {
-               reg = <2>;
-       };
-};
-
-&padctrl0_apsys {
-       gmac0_pins: gmac0-0 {
-               tx-pins {
-                       pins = "GMAC0_TX_CLK",
-                              "GMAC0_TXEN",
-                              "GMAC0_TXD0",
-                              "GMAC0_TXD1",
-                              "GMAC0_TXD2",
-                              "GMAC0_TXD3";
-                       function = "gmac0";
-                       bias-disable;
-                       drive-strength = <25>;
-                       input-disable;
-                       input-schmitt-disable;
-                       slew-rate = <0>;
-               };
-
-               rx-pins {
-                       pins = "GMAC0_RX_CLK",
-                              "GMAC0_RXDV",
-                              "GMAC0_RXD0",
-                              "GMAC0_RXD1",
-                              "GMAC0_RXD2",
-                              "GMAC0_RXD3";
-                       function = "gmac0";
-                       bias-disable;
-                       drive-strength = <1>;
-                       input-enable;
-                       input-schmitt-disable;
-                       slew-rate = <0>;
-               };
-       };
-
-       gmac1_pins: gmac1-0 {
-               tx-pins {
-                       pins = "GPIO2_18", /* GMAC1_TX_CLK */
-                              "GPIO2_20", /* GMAC1_TXEN */
-                              "GPIO2_21", /* GMAC1_TXD0 */
-                              "GPIO2_22", /* GMAC1_TXD1 */
-                              "GPIO2_23", /* GMAC1_TXD2 */
-                              "GPIO2_24"; /* GMAC1_TXD3 */
-                       function = "gmac1";
-                       bias-disable;
-                       drive-strength = <25>;
-                       input-disable;
-                       input-schmitt-disable;
-                       slew-rate = <0>;
-               };
-
-               rx-pins {
-                       pins = "GPIO2_19", /* GMAC1_RX_CLK */
-                              "GPIO2_25", /* GMAC1_RXDV */
-                              "GPIO2_30", /* GMAC1_RXD0 */
-                              "GPIO2_31", /* GMAC1_RXD1 */
-                              "GPIO3_0",  /* GMAC1_RXD2 */
-                              "GPIO3_1";  /* GMAC1_RXD3 */
-                       function = "gmac1";
-                       bias-disable;
-                       drive-strength = <1>;
-                       input-enable;
-                       input-schmitt-disable;
-                       slew-rate = <0>;
-               };
-       };
-
-       mdio0_pins: mdio0-0 {
-               mdc-pins {
-                       pins = "GMAC0_MDC";
-                       function = "gmac0";
-                       bias-disable;
-                       drive-strength = <13>;
-                       input-disable;
-                       input-schmitt-disable;
-                       slew-rate = <0>;
-               };
-
-               mdio-pins {
-                       pins = "GMAC0_MDIO";
-                       function = "gmac0";
-                       bias-disable;
-                       drive-strength = <13>;
-                       input-enable;
-                       input-schmitt-enable;
-                       slew-rate = <0>;
-               };
-       };
-};
-
-&sdio0 {
-       bus-width = <4>;
-       max-frequency = <198000000>;
-       status = "okay";
-};
diff --git a/arch/riscv/dts/th1520-lichee-pi-4a-u-boot.dtsi 
b/arch/riscv/dts/th1520-lichee-pi-4a-u-boot.dtsi
new file mode 100644
index 00000000000..06d4a70d1ea
--- /dev/null
+++ b/arch/riscv/dts/th1520-lichee-pi-4a-u-boot.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Yao Zi <zi...@disroot.org>
+ */
+
+#include "th1520-lichee-module-4a-u-boot.dtsi"
+#include "thead-th1520-binman.dtsi"
+
+&clk {
+       bootph-some-ram;
+};
+
+&padctrl0_apsys {
+       bootph-some-ram;
+};
+
+&uart0_pins {
+       bootph-some-ram;
+
+       tx-pins {
+               bootph-some-ram;
+       };
+
+       rx-pins {
+               bootph-some-ram;
+       };
+};
diff --git a/arch/riscv/dts/th1520-lichee-pi-4a.dts 
b/arch/riscv/dts/th1520-lichee-pi-4a.dts
deleted file mode 100644
index 49af88b7adf..00000000000
--- a/arch/riscv/dts/th1520-lichee-pi-4a.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2023 Jisheng Zhang <jszh...@kernel.org>
- */
-
-#include "th1520-lichee-module-4a.dtsi"
-#include "thead-th1520-binman.dtsi"
-
-/ {
-       model = "Sipeed Lichee Pi 4A";
-       compatible = "sipeed,lichee-pi-4a", "sipeed,lichee-module-4a", 
"thead,th1520";
-
-       aliases {
-               gpio0 = &gpio0;
-               gpio1 = &gpio1;
-               gpio2 = &gpio2;
-               gpio3 = &gpio3;
-               serial0 = &uart0;
-               serial1 = &uart1;
-               serial2 = &uart2;
-               serial3 = &uart3;
-               serial4 = &uart4;
-               serial5 = &uart5;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-};
-
-&uart0 {
-       status = "okay";
-};
diff --git a/arch/riscv/dts/th1520-u-boot.dtsi 
b/arch/riscv/dts/th1520-u-boot.dtsi
new file mode 100644
index 00000000000..45ffccbb847
--- /dev/null
+++ b/arch/riscv/dts/th1520-u-boot.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Yao Zi <zi...@disroot.org>
+ */
+
+&{/soc} {
+       ddrc: ddrc@fffd000000 {
+               compatible = "thead,th1520-ddrc";
+               reg = <0xff 0xfd000000 0x0 0x1000000>,
+                     <0xff 0xfe000000 0x0 0x1000000>,
+                     <0xff 0xff000000 0x0 0x4000>,
+                     <0xff 0xff005000 0x0 0x1000>;
+               reg-names = "phy-0", "phy-1", "ctrl", "sys";
+               bootph-pre-ram;
+       };
+};
+
+&cpus {
+       bootph-pre-ram;
+};
+
+&c910_0 {
+       bootph-pre-ram;
+};
+
+&c910_1 {
+       bootph-pre-ram;
+};
+
+&c910_2 {
+       bootph-pre-ram;
+};
+
+&c910_3 {
+       bootph-pre-ram;
+};
+
+&clint {
+       bootph-pre-ram;
+};
+
+&uart0 {
+       bootph-pre-ram;
+};
diff --git a/arch/riscv/dts/th1520.dtsi b/arch/riscv/dts/th1520.dtsi
deleted file mode 100644
index c46925a132a..00000000000
--- a/arch/riscv/dts/th1520.dtsi
+++ /dev/null
@@ -1,530 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2021 Alibaba Group Holding Limited.
- * Copyright (C) 2023 Jisheng Zhang <jszh...@kernel.org>
- */
-
-#include <dt-bindings/clock/thead,th1520-clk-ap.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-       compatible = "thead,th1520";
-       #address-cells = <2>;
-       #size-cells = <2>;
-
-       cpus: cpus {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               bootph-pre-ram;
-               timebase-frequency = <3000000>;
-
-               c910_0: cpu@0 {
-                       compatible = "thead,c910", "riscv";
-                       device_type = "cpu";
-                       riscv,isa = "rv64imafdc";
-                       reg = <0>;
-                       bootph-pre-ram;
-                       i-cache-block-size = <64>;
-                       i-cache-size = <65536>;
-                       i-cache-sets = <512>;
-                       d-cache-block-size = <64>;
-                       d-cache-size = <65536>;
-                       d-cache-sets = <512>;
-                       next-level-cache = <&l2_cache>;
-                       mmu-type = "riscv,sv39";
-
-                       cpu0_intc: interrupt-controller {
-                               compatible = "riscv,cpu-intc";
-                               interrupt-controller;
-                               #interrupt-cells = <1>;
-                       };
-               };
-
-               c910_1: cpu@1 {
-                       compatible = "thead,c910", "riscv";
-                       device_type = "cpu";
-                       riscv,isa = "rv64imafdc";
-                       reg = <1>;
-                       bootph-pre-ram;
-                       i-cache-block-size = <64>;
-                       i-cache-size = <65536>;
-                       i-cache-sets = <512>;
-                       d-cache-block-size = <64>;
-                       d-cache-size = <65536>;
-                       d-cache-sets = <512>;
-                       next-level-cache = <&l2_cache>;
-                       mmu-type = "riscv,sv39";
-
-                       cpu1_intc: interrupt-controller {
-                               compatible = "riscv,cpu-intc";
-                               interrupt-controller;
-                               #interrupt-cells = <1>;
-                       };
-               };
-
-               c910_2: cpu@2 {
-                       compatible = "thead,c910", "riscv";
-                       device_type = "cpu";
-                       riscv,isa = "rv64imafdc";
-                       reg = <2>;
-                       bootph-pre-ram;
-                       i-cache-block-size = <64>;
-                       i-cache-size = <65536>;
-                       i-cache-sets = <512>;
-                       d-cache-block-size = <64>;
-                       d-cache-size = <65536>;
-                       d-cache-sets = <512>;
-                       next-level-cache = <&l2_cache>;
-                       mmu-type = "riscv,sv39";
-
-                       cpu2_intc: interrupt-controller {
-                               compatible = "riscv,cpu-intc";
-                               interrupt-controller;
-                               #interrupt-cells = <1>;
-                       };
-               };
-
-               c910_3: cpu@3 {
-                       compatible = "thead,c910", "riscv";
-                       device_type = "cpu";
-                       riscv,isa = "rv64imafdc";
-                       reg = <3>;
-                       bootph-pre-ram;
-                       i-cache-block-size = <64>;
-                       i-cache-size = <65536>;
-                       i-cache-sets = <512>;
-                       d-cache-block-size = <64>;
-                       d-cache-size = <65536>;
-                       d-cache-sets = <512>;
-                       next-level-cache = <&l2_cache>;
-                       mmu-type = "riscv,sv39";
-
-                       cpu3_intc: interrupt-controller {
-                               compatible = "riscv,cpu-intc";
-                               interrupt-controller;
-                               #interrupt-cells = <1>;
-                       };
-               };
-
-               l2_cache: l2-cache {
-                       compatible = "cache";
-                       cache-block-size = <64>;
-                       cache-level = <2>;
-                       cache-size = <1048576>;
-                       cache-sets = <1024>;
-                       cache-unified;
-               };
-       };
-
-       osc: oscillator {
-               compatible = "fixed-clock";
-               clock-output-names = "osc_24m";
-               #clock-cells = <0>;
-       };
-
-       osc_32k: 32k-oscillator {
-               compatible = "fixed-clock";
-               clock-output-names = "osc_32k";
-               #clock-cells = <0>;
-       };
-
-       aonsys_clk: clock-73728000 {
-               compatible = "fixed-clock";
-               clock-frequency = <73728000>;
-               clock-output-names = "aonsys_clk";
-               #clock-cells = <0>;
-       };
-
-       soc {
-               compatible = "simple-bus";
-               interrupt-parent = <&plic>;
-               #address-cells = <2>;
-               #size-cells = <2>;
-               ranges;
-
-               plic: interrupt-controller@ffd8000000 {
-                       compatible = "thead,th1520-plic", "thead,c900-plic";
-                       reg = <0xff 0xd8000000 0x0 0x01000000>;
-                       interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
-                                             <&cpu1_intc 11>, <&cpu1_intc 9>,
-                                             <&cpu2_intc 11>, <&cpu2_intc 9>,
-                                             <&cpu3_intc 11>, <&cpu3_intc 9>;
-                       interrupt-controller;
-                       #address-cells = <0>;
-                       #interrupt-cells = <2>;
-                       riscv,ndev = <240>;
-               };
-
-               clint: timer@ffdc000000 {
-                       compatible = "thead,th1520-clint", "thead,c900-clint";
-                       reg = <0xff 0xdc000000 0x0 0x00010000>;
-                       bootph-pre-ram;
-                       interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
-                                             <&cpu1_intc 3>, <&cpu1_intc 7>,
-                                             <&cpu2_intc 3>, <&cpu2_intc 7>,
-                                             <&cpu3_intc 3>, <&cpu3_intc 7>;
-               };
-
-               uart0: serial@ffe7014000 {
-                       compatible = "snps,dw-apb-uart";
-                       reg = <0xff 0xe7014000 0x0 0x100>;
-                       bootph-pre-ram;
-                       interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART0_PCLK>;
-                       clock-names = "buadclk", "apb_pclk";
-                       reg-shift = <2>;
-                       reg-io-width = <4>;
-                       status = "disabled";
-               };
-
-               gmac1: ethernet@ffe7060000 {
-                       compatible = "thead,th1520-gmac", "snps,dwmac-3.70a";
-                       reg = <0xff 0xe7060000 0x0 0x2000>, <0xff 0xec004000 
0x0 0x1000>;
-                       reg-names = "dwmac", "apb";
-                       interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
-                       interrupt-names = "macirq";
-                       clocks = <&clk CLK_GMAC_AXI>, <&clk CLK_GMAC1>;
-                       clock-names = "stmmaceth", "pclk";
-                       snps,pbl = <32>;
-                       snps,fixed-burst;
-                       snps,multicast-filter-bins = <64>;
-                       snps,perfect-filter-entries = <32>;
-                       status = "disabled";
-
-                       mdio1: mdio {
-                               compatible = "snps,dwmac-mdio";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                       };
-               };
-
-               gmac0: ethernet@ffe7070000 {
-                       compatible = "thead,th1520-gmac", "snps,dwmac-3.70a";
-                       reg = <0xff 0xe7070000 0x0 0x2000>, <0xff 0xec003000 
0x0 0x1000>;
-                       reg-names = "dwmac", "apb";
-                       interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
-                       interrupt-names = "macirq";
-                       clocks = <&clk CLK_GMAC_AXI>, <&clk CLK_GMAC0>;
-                       clock-names = "stmmaceth", "pclk";
-                       snps,pbl = <32>;
-                       snps,fixed-burst;
-                       snps,multicast-filter-bins = <64>;
-                       snps,perfect-filter-entries = <32>;
-                       status = "disabled";
-
-                       mdio0: mdio {
-                               compatible = "snps,dwmac-mdio";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                       };
-               };
-
-               emmc: mmc@ffe7080000 {
-                       compatible = "thead,th1520-dwcmshc";
-                       reg = <0xff 0xe7080000 0x0 0x10000>;
-                       interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&clk CLK_EMMC_SDIO>;
-                       clock-names = "core";
-                       status = "disabled";
-               };
-
-               sdio0: mmc@ffe7090000 {
-                       compatible = "thead,th1520-dwcmshc";
-                       reg = <0xff 0xe7090000 0x0 0x10000>;
-                       interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&clk CLK_EMMC_SDIO>;
-                       clock-names = "core";
-                       status = "disabled";
-               };
-
-               sdio1: mmc@ffe70a0000 {
-                       compatible = "thead,th1520-dwcmshc";
-                       reg = <0xff 0xe70a0000 0x0 0x10000>;
-                       interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&clk CLK_EMMC_SDIO>;
-                       clock-names = "core";
-                       status = "disabled";
-               };
-
-               uart1: serial@ffe7f00000 {
-                       compatible = "snps,dw-apb-uart";
-                       reg = <0xff 0xe7f00000 0x0 0x100>;
-                       interrupts = <37 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART1_PCLK>;
-                       clock-names = "buadclk", "apb_pclk";
-                       reg-shift = <2>;
-                       reg-io-width = <4>;
-                       status = "disabled";
-               };
-
-               uart3: serial@ffe7f04000 {
-                       compatible = "snps,dw-apb-uart";
-                       reg = <0xff 0xe7f04000 0x0 0x100>;
-                       interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART3_PCLK>;
-                       clock-names = "buadclk", "apb_pclk";
-                       reg-shift = <2>;
-                       reg-io-width = <4>;
-                       status = "disabled";
-               };
-
-               gpio2: gpio@ffe7f34000 {
-                       compatible = "snps,dw-apb-gpio";
-                       reg = <0xff 0xe7f34000 0x0 0x1000>;
-                       clocks = <&clk CLK_GPIO2>;
-                       clock-names = "bus";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       portc: gpio-controller@0 {
-                               compatible = "snps,dw-apb-gpio-port";
-                               gpio-controller;
-                               #gpio-cells = <2>;
-                               ngpios = <32>;
-                               reg = <0>;
-                               interrupt-controller;
-                               #interrupt-cells = <2>;
-                               interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
-                       };
-               };
-
-               gpio3: gpio@ffe7f38000 {
-                       compatible = "snps,dw-apb-gpio";
-                       reg = <0xff 0xe7f38000 0x0 0x1000>;
-                       clocks = <&clk CLK_GPIO3>;
-                       clock-names = "bus";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       portd: gpio-controller@0 {
-                               compatible = "snps,dw-apb-gpio-port";
-                               gpio-controller;
-                               #gpio-cells = <2>;
-                               ngpios = <32>;
-                               reg = <0>;
-                               interrupt-controller;
-                               #interrupt-cells = <2>;
-                               interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
-                       };
-               };
-
-               padctrl1_apsys: pinctrl@ffe7f3c000 {
-                       compatible = "thead,th1520-pinctrl";
-                       reg = <0xff 0xe7f3c000 0x0 0x1000>;
-                       clocks = <&clk CLK_PADCTRL1>;
-                       thead,pad-group = <2>;
-               };
-
-               gpio0: gpio@ffec005000 {
-                       compatible = "snps,dw-apb-gpio";
-                       reg = <0xff 0xec005000 0x0 0x1000>;
-                       clocks = <&clk CLK_GPIO0>;
-                       clock-names = "bus";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       porta: gpio-controller@0 {
-                               compatible = "snps,dw-apb-gpio-port";
-                               gpio-controller;
-                               #gpio-cells = <2>;
-                               ngpios = <32>;
-                               reg = <0>;
-                               interrupt-controller;
-                               #interrupt-cells = <2>;
-                               interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
-                       };
-               };
-
-               gpio1: gpio@ffec006000 {
-                       compatible = "snps,dw-apb-gpio";
-                       reg = <0xff 0xec006000 0x0 0x1000>;
-                       clocks = <&clk CLK_GPIO1>;
-                       clock-names = "bus";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       portb: gpio-controller@0 {
-                               compatible = "snps,dw-apb-gpio-port";
-                               gpio-controller;
-                               #gpio-cells = <2>;
-                               ngpios = <32>;
-                               reg = <0>;
-                               interrupt-controller;
-                               #interrupt-cells = <2>;
-                               interrupts = <57 IRQ_TYPE_LEVEL_HIGH>;
-                       };
-               };
-
-               padctrl0_apsys: pinctrl@ffec007000 {
-                       compatible = "thead,th1520-pinctrl";
-                       reg = <0xff 0xec007000 0x0 0x1000>;
-                       clocks = <&clk CLK_PADCTRL0>;
-                       thead,pad-group = <3>;
-               };
-
-               uart2: serial@ffec010000 {
-                       compatible = "snps,dw-apb-uart";
-                       reg = <0xff 0xec010000 0x0 0x4000>;
-                       interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART2_PCLK>;
-                       clock-names = "buadclk", "apb_pclk";
-                       reg-shift = <2>;
-                       reg-io-width = <4>;
-                       status = "disabled";
-               };
-
-               clk: clock-controller@ffef010000 {
-                       compatible = "thead,th1520-clk-ap";
-                       reg = <0xff 0xef010000 0x0 0x1000>;
-                       clocks = <&osc>;
-                       #clock-cells = <1>;
-               };
-
-               timer0: timer@ffefc32000 {
-                       compatible = "snps,dw-apb-timer";
-                       reg = <0xff 0xefc32000 0x0 0x14>;
-                       clocks = <&clk CLK_PERI_APB_PCLK>;
-                       clock-names = "timer";
-                       interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
-                       status = "disabled";
-               };
-
-               timer1: timer@ffefc32014 {
-                       compatible = "snps,dw-apb-timer";
-                       reg = <0xff 0xefc32014 0x0 0x14>;
-                       clocks = <&clk CLK_PERI_APB_PCLK>;
-                       clock-names = "timer";
-                       interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
-                       status = "disabled";
-               };
-
-               timer2: timer@ffefc32028 {
-                       compatible = "snps,dw-apb-timer";
-                       reg = <0xff 0xefc32028 0x0 0x14>;
-                       clocks = <&clk CLK_PERI_APB_PCLK>;
-                       clock-names = "timer";
-                       interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
-                       status = "disabled";
-               };
-
-               timer3: timer@ffefc3203c {
-                       compatible = "snps,dw-apb-timer";
-                       reg = <0xff 0xefc3203c 0x0 0x14>;
-                       clocks = <&clk CLK_PERI_APB_PCLK>;
-                       clock-names = "timer";
-                       interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
-                       status = "disabled";
-               };
-
-               uart4: serial@fff7f08000 {
-                       compatible = "snps,dw-apb-uart";
-                       reg = <0xff 0xf7f08000 0x0 0x4000>;
-                       interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART4_PCLK>;
-                       clock-names = "buadclk", "apb_pclk";
-                       reg-shift = <2>;
-                       reg-io-width = <4>;
-                       status = "disabled";
-               };
-
-               uart5: serial@fff7f0c000 {
-                       compatible = "snps,dw-apb-uart";
-                       reg = <0xff 0xf7f0c000 0x0 0x4000>;
-                       interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART5_PCLK>;
-                       clock-names = "buadclk", "apb_pclk";
-                       reg-shift = <2>;
-                       reg-io-width = <4>;
-                       status = "disabled";
-               };
-
-               ddrc: ddrc@fffd000000 {
-                       compatible = "thead,th1520-ddrc";
-                       reg = <0xff 0xfd000000 0x0 0x1000000>,
-                             <0xff 0xfe000000 0x0 0x1000000>,
-                             <0xff 0xff000000 0x0 0x4000>,
-                             <0xff 0xff005000 0x0 0x1000>;
-                       reg-names = "phy-0", "phy-1", "ctrl", "sys";
-                       bootph-pre-ram;
-               };
-
-               timer4: timer@ffffc33000 {
-                       compatible = "snps,dw-apb-timer";
-                       reg = <0xff 0xffc33000 0x0 0x14>;
-                       clocks = <&clk CLK_PERI_APB_PCLK>;
-                       clock-names = "timer";
-                       interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
-                       status = "disabled";
-               };
-
-               timer5: timer@ffffc33014 {
-                       compatible = "snps,dw-apb-timer";
-                       reg = <0xff 0xffc33014 0x0 0x14>;
-                       clocks = <&clk CLK_PERI_APB_PCLK>;
-                       clock-names = "timer";
-                       interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
-                       status = "disabled";
-               };
-
-               timer6: timer@ffffc33028 {
-                       compatible = "snps,dw-apb-timer";
-                       reg = <0xff 0xffc33028 0x0 0x14>;
-                       clocks = <&clk CLK_PERI_APB_PCLK>;
-                       clock-names = "timer";
-                       interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-                       status = "disabled";
-               };
-
-               timer7: timer@ffffc3303c {
-                       compatible = "snps,dw-apb-timer";
-                       reg = <0xff 0xffc3303c 0x0 0x14>;
-                       clocks = <&clk CLK_PERI_APB_PCLK>;
-                       clock-names = "timer";
-                       interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
-                       status = "disabled";
-               };
-
-               ao_gpio0: gpio@fffff41000 {
-                       compatible = "snps,dw-apb-gpio";
-                       reg = <0xff 0xfff41000 0x0 0x1000>;
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       porte: gpio-controller@0 {
-                               compatible = "snps,dw-apb-gpio-port";
-                               gpio-controller;
-                               #gpio-cells = <2>;
-                               ngpios = <32>;
-                               reg = <0>;
-                               interrupt-controller;
-                               #interrupt-cells = <2>;
-                               interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
-                       };
-               };
-
-               padctrl_aosys: pinctrl@fffff4a000 {
-                       compatible = "thead,th1520-pinctrl";
-                       reg = <0xff 0xfff4a000 0x0 0x2000>;
-                       clocks = <&aonsys_clk>;
-                       thead,pad-group = <1>;
-               };
-
-               ao_gpio1: gpio@fffff52000 {
-                       compatible = "snps,dw-apb-gpio";
-                       reg = <0xff 0xfff52000 0x0 0x1000>;
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       portf: gpio-controller@0 {
-                               compatible = "snps,dw-apb-gpio-port";
-                               gpio-controller;
-                               #gpio-cells = <2>;
-                               ngpios = <32>;
-                               reg = <0>;
-                               interrupt-controller;
-                               #interrupt-cells = <2>;
-                               interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
-                       };
-               };
-       };
-};
diff --git a/configs/th1520_lpi4a_defconfig b/configs/th1520_lpi4a_defconfig
index 731fe378ac8..1039c2ac54e 100644
--- a/configs/th1520_lpi4a_defconfig
+++ b/configs/th1520_lpi4a_defconfig
@@ -6,7 +6,7 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
 CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="th1520-lichee-pi-4a"
+CONFIG_DEFAULT_DEVICE_TREE="thead/th1520-lichee-pi-4a"
 CONFIG_SPL_STACK=0xffe0170000
 CONFIG_SPL_BSS_START_ADDR=0xffe0160000
 CONFIG_SPL_BSS_MAX_SIZE=0x10000
-- 
2.50.1

Reply via email to