> > David, I prefer to have two patch for this. > > One is the CMD_MII support > > The second is the extend UEC to 4. > No problem. Will split the patch. Merging is on you though :) > Regarding the MII support: This will include also a fix in the TSEC > driver to enable it to address all MII addresses on the bus, > regardless > of the port (as someone asked here).
Thanks > Regarding the thread number: As each UEC requires 8+ threads (4 for > tx, > 4 for rx), extending the number of UECs to 4 will exceed the number of > QE threads. Now, 4 threads per TX/RX is only required for the GBE UEC. > FE only requires one thread. So I'll change the driver in a way that > it > will use 4+4 threads in case of GBE, and 1+1 in case of FE. I already > tested it here - and it worked fine. This way we won't need these CFG > options per UEC any more. Is this ok? It looks good to me. Thanks, Dave ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
