Hi
I am experiencing problems using a ramdisk with Das u-boot, and although
I have been reading the previous questions and answers in the mailing
list I cannot solve the question.
The problem: I can start a Linux kernel and its filesystem from flash
(linux image made using mkimage, and filesystem in cramfs format).
However, if I try to boot them from flash (this time both images have
been constructed using mkimage), the kernel starts, but a "No filesystem
could mount root, tried: cramfs romfs" appears.
Upload of kernel: tftp 0x260000 linux.uboot
Upload of fs: tftp 0x3a0000 root.uboot
Environment:
=> printenv
bootcmd=run bootflash
bootdelay=3
baudrate=115200
eth1addr=00:02:b3:02:02:02
kernel_addr=50060000
ramdisk_addr=501A0000
bootflash=bootm $(kernel_addr)
stdin=serial
stdout=serial
stderr=serial
ethact=i82559#0
ethaddr=00:11:22:33:44:55
tftpdstp=10069
bootargs=console=ttyS0,115200 root=/dev/ram0 rw irqpoll
mtdparts=physmap-flash.0:256k(boot),128k(conf),1280k(linux),-(root)
mem=128MB
filesize=f4040
fileaddr=3A0000
netmask=255.255.0.0
ipaddr=128.127.165.133
serverip=128.127.50.94
As you can see, I do not use initrd param because I suppose it is
directly passed to the kernel.
Whole log:
### Configuring the network
setenv ethaddr 00:11:22:33:44:55
=> setenv ipaddr 128.127.165.133
=> setenv serverip 128.127.50.94
=> setenv netmask 255.255.0.0
=> setenv tftpdstp 10069
=> setenv bootargs console=ttyS0,115200 root=/dev/ram0 rw irqpoll
mtdparts=physmap-flash.0:256k(boot),128k(conf),1280k(linux),-(root)
mem=128MB
=>
### Uploading kernel
tftp 0x260000 linux.uboot
Using i82559#0 device
TFTP from server 128.127.50.94; our IP address is 128.127.165.133
Filename 'linux.uboot'.
Transferred 0 KB of 1111 KB (0 %)60000
Transferred 185 KB of 1111 KB (16 %)#############################
#################################################################
#################################################################ERROR:
Timeout waiting for ack (errno: 11 n: -1)
ERROR: Ack(s) lost. Resending: 1950
ERROR: Ack(s) lost. Resending complete.
Transferred 1111 KB of 1111 KB (100 %)#############
#
done
Bytes transferred = 1138480 (115f30 hex)
=>
### Uploading file system
tftp 0x3a0000 root.uboot
Using i82559#0 device
TFTP from server 128.127.50.94; our IP address is 128.127.165.133
Filename 'root.uboot'.
Load address: 0x3a0000
Loading: #################################################################
Transferred 465 KB of 976 KB (47 %)######################################
Transferred 976 KB of 976 KB (100 %)######################################
#
done
Bytes transferred = 999488 (f4040 hex)
=>
### Boot from ram
bootm 0x260000 0x3a0000
## Booting image at 00260000 ...
Image Name: linux-2.6.22.15
Image Type: ARM Linux Kernel Image (gzip compressed)
Data Size: 1138416 Bytes = 1.1 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading Ramdisk Image at 003a0000 ...
Image Name: root
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 999424 Bytes = 976 kB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Starting kernel ...
Linux version 2.6.22.15-uSysCom ([EMAIL PROTECTED]) (gcc version 4.1.2) #10
PREEMPT Mon Feb 11 20:15:32 CET 2008
CPU: XScale-IXP46x Family [69054202] revision 2 (ARMv5TE), cr=000039ff
Machine: Intel IXDP465 Development Platform
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists. Total pages: 32512
Kernel command line: console=ttyS0,115200 root=/dev/ram0 rw irqpoll
mtdparts=physmap-flash.0:256k(boot),128k(conf),1280k(linux),-(root)
mem=128MB
Misrouted IRQ fixup and polling support enabled
This may significantly impact system performance
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 127232KB available (2204K code, 226K data, 104K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
IXP4xx: Using 32MiB expansion bus window size
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Time: OSTS clocksource has been installed.
Switched to high resolution mode on CPU 0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (double precision)
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
RAMDISK driver initialized: 4 RAM disks of 8192K size 1024 blocksize
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[EMAIL PROTECTED]>
physmap platform flash device: 02000000 at 50000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
4 cmdlinepart partitions found on MTD device physmap-flash.0
Creating 4 MTD partitions on "physmap-flash.0":
0x00000000-0x00040000 : "boot"
0x00040000-0x00060000 : "conf"
0x00060000-0x001a0000 : "linux"
0x001a0000-0x02000000 : "root"
i2c /dev entries driver
Driver for 1-wire Dallas network protocol.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
[EMAIL PROTECTED]
nf_conntrack version 0.5.0 (1024 buckets, 8192 max)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
NET: Registered protocol family 33
802.1Q VLAN Support v1.8 Ben Greear <[EMAIL PROTECTED]>
All bugs added by David S. Miller <[EMAIL PROTECTED]>
SCTP: Hash tables configured (established 4096 bind 8192)
XScale DSP coprocessor detected.
List of all partitions:
1f00 256 mtdblock0 (driver?)
1f01 128 mtdblock1 (driver?)
1f02 1280 mtdblock2 (driver?)
1f03 31104 mtdblock3 (driver?)
No filesystem could mount root, tried: cramfs romfs
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(1,0)
I am not quite sure about the -a and -e parameters for the mkimage (I
have tried different ones for the ramdisk... the kernel seems to be
correct with 0x8000).
The RAM of my system begins on 0x0 and then is moved into 0x200000.
Any clues?
Thanks
Miguel Ángel
This message (and any associated files) is intended only for the
use of the individual or entity to which it is addressed and may
contain information that is confidential, subject to copyright or
constitutes a trade secret. If you are not the intended recipient
you are hereby notified that any dissemination, copying or
distribution of this message, or files associated with this message,
is strictly prohibited. If you have received this message in error,
please notify us immediately by replying to the message and deleting
it from your computer. Messages sent to and from us may be monitored.
Internet communications cannot be guaranteed to be secure or error-free
as information could be intercepted, corrupted, lost, destroyed, arrive
late or incomplete, or contain viruses. Therefore, we do not accept
responsibility for any errors or omissions that are present in this
message, or any attachment, that have arisen as a result of e-mail
transmission. If verification is required, please request a hard-copy
version. Any views or opinions presented are solely those of the author
and do not necessarily represent those of the company.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
