E Robertson wrote: > On 2/12/08, michael <[EMAIL PROTECTED]> wrote: > >> Hi, >> >>> That's exactly what I have but I always get this after about 24% : >>> >>> ************************* >>> SEND-class command failed. >>> Packets sent: 69 >>> Retransmissions: 11 >>> Timeouts: 12 >>> Damaged packets: 0 >>> Fatal Kermit Protocol Error: Too many retries >>> >>> HINTS... If the preceding error message does not explain the failure: >>> . Try changing the remote Kermit's FLOW-CONTROL setting. >>> . Try it again with SET STREAMING OFF. >>> . Try it again with SET PARITY SPACE. >>> . As a last resort, give a ROBUST command and try again. >>> Also: >>> . Be sure the source file has read permission. >>> . Be sure the target directory has write permission. >>> (Use SET HINTS OFF to suppress hints.) >>> ************************* >>> ~ >>> >>> >>> >> The system is up? Do you have the u-boot console again? Do you choose >> a good memory address for starting download? >> > > That was the problem. I choose a new address and it downloaded ok. > However, it seems that my initial conclusion was correct in that it's > the u-boot build. It hangs when I ran the new image. The old "working > image" at least ran. It looks like I need to do some work on the boot > process in uboot. > > Thanks much for your help. > > Can you send me your diff?
------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
