Hello,
Rodolfo Giometti wrote:
> On Mon, Feb 11, 2008 at 08:42:08PM +0100, Anatolij Gustschin wrote:
>> Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
>> 800x600, 640x480 at 24, 16 and 8 bpp. Hope this patch
>> won't screw up X300 and X700 support.
>
> Can someone test/check this issue? :)
>
>> Signed-off-by: Anatolij Gustschin <[EMAIL PROTECTED]>
>> ---
>> drivers/video/ati_radeon_fb.c | 401
>> +++++++++++++++++++++++++++++++++++++++--
>> 1 files changed, 386 insertions(+), 15 deletions(-)
<snip>
>> @@ -90,12 +93,115 @@ static u16 ati_radeon_id_family_table[][2] = {
>> {PCI_CHIP_RV280_5961, CHIP_FAMILY_RV280},
>> {PCI_CHIP_RV280_5962, CHIP_FAMILY_RV280},
>> {PCI_CHIP_RV280_5964, CHIP_FAMILY_RV280},
>> + {PCI_CHIP_RV280_5C63, CHIP_FAMILY_RV280},
>> {PCI_CHIP_RV370_5B60, CHIP_FAMILY_RV380},
>> {PCI_CHIP_RV380_5657, CHIP_FAMILY_RV380},
>> {PCI_CHIP_R420_554d, CHIP_FAMILY_R420},
>> {0, 0}
>> };
>
> Are you adding a new board here? If so, please provide a separate
> patch.
Yes. This is a Radeon Mobility 9200 board, which is RV280 based.
Ok.
<snip>
>> +#if 1 /* @ 60 Hz */
>> + mode->crtc_h_total_disp = 0x009f00d2;
>> + mode->crtc_h_sync_strt_wid = 0x000e0528;
>> + mode->crtc_v_total_disp = 0x03ff0429;
>> + mode->crtc_v_sync_strt_wid = 0x00030400;
>> + mode->crtc_pitch = 0x00a000a0;
>> + mode->ppll_div_3 = 0x00010060;
>> +#else /* @ 75 Hz */
>> + mode->crtc_h_total_disp = 0x009f00d2;
>> + mode->crtc_h_sync_strt_wid = 0x00120508;
>> + mode->crtc_v_total_disp = 0x03ff0429;
>> + mode->crtc_v_sync_strt_wid = 0x00030400;
>> + mode->crtc_pitch = 0x00a000a0;
>> + mode->ppll_div_3 = 0x00010078;
>> +#endif
>
> Mmm... better adding a configuration define here or just remove the
> unused code.
Ok, I'm going to drop the unused code then.
<snip>
>> - radeon_setmode();
>> + if (rinfo->family == CHIP_FAMILY_RV280)
>> + radeon_setmode_9200(vesa_idx, bits_per_pixel);
>> + else
>> + radeon_setmode();
>>
>> return ((void *) pGD);
>> }
>> --
>> 1.5.3.3
>
> Suggestion: your patch is filled by several magic numbers, maybe
> adding some defines can improve its readability. :)
Ok, I will try it and resubmit separated patches.
Best regards,
Anatolij
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED]
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
