Hi Nikhil, On Wednesday 20 February 2008, Nikhil Gautam wrote: > Below is the most of my init.S file. You are correct about the > faulting location. But I can see in the init.S file that this address > location is defined as "AC_R|AC_W|AC_X|SA_G" so I think I should be > able to at least read it.
I suggest that you look at the TLB setup with the BDI2000 when U-Boot is up and running, before trying to dump the last 4k from U-Boot: => tlb 0 63 This will show you the currently configured TLB's. > When I boot from 256Mb NAND flash, I don't > see this problem. Its only when I boot from 1Gb NAND flash. And 1Gb is large page, right? Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
