In message <[EMAIL PROTECTED]> you wrote: > > > I don't think this is a good idea. File names and board config names > > should match as far as possible, and here is no good reason to > > deviate from this rule. > > But the DTS files have already been renamed. The DTS for the MPC832xE-MDS is > called mpc832x_mds.dts, so the DTB is going to be called mpc832x_mds.dtb.
Well, then undo that change, please? It doesn't make sense to me. Note that you only change the default environment, i. e. all the installed systems out in the field will most probably still use the old names anyway, even if they update to a recent version of U-Boot... > Would you prefer that Kim also renamed MPC832XEMDS.h to MPC832X_MDS.h, as well > as change the Makefile? No, definitely not. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] The explanation requiring the fewest assumptions is the most likely to be correct. -- William of Occam ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
