On Thu, Mar 13, 2008 at 9:31 AM, 郭劲 <[EMAIL PROTECTED]> wrote:
> Hi,friends,
>
> I make all the frequency(timebase-frequency;bus-frequency;clock-frequency)
> value
> on device tree file equal to zero, I think those frequency will filled by
> u-boot
> during bootm, but in fact, the u-boot did not fill any frequency. after
> bootm,
> crashed. Why?
>
> Why so many document point out that the zero value will be filled by u-boot?
In most cases it will assuming that your u-boot board port is
configured to fill in those values. You need to make sure that the
ft_board_setup function is getting called by bootm and that it fills
in those properties.
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
