Hello,

Your following question has been entered into our system with SR#1-427611553 
and our engineer will be responding to you directly.

Best regards,
Freescale Semiconductor 

-----Original Message-----
From: 郭劲 [mailto:[EMAIL PROTECTED] 
Sent: 2008年3月14日 9:41 AM
To: Grant Likely
Cc: Support Customer; [EMAIL PROTECTED]; u-boot-users@lists.sourceforge.net
Subject: Re: [U-Boot-Users] Hi, friends, the question about the u-boot and 
device tree?

Hi,friends,

I made follow define on my MPC8360EMDS.h file. Is it enough? The uboot still 
did not fill the zero frequency on dtb. I think the ft_cpu_setup and 
ft_board_setup function have been run.


/* pass open firmware flat tree */
#define CONFIG_OF_FLAT_TREE              1
#define CONFIG_OF_BOARD_SETUP   1
/* maximum size of the flat tree (8K) */
#define OF_FLAT_TREE_MAX_SIZE   8192


>From: "Grant Likely" <[EMAIL PROTECTED]>
>Reply-To: 
>To: "郭劲" <[EMAIL PROTECTED]>
>Subject: Re: [U-Boot-Users] Hi, friends, the question about the u-boot 
>and device
tree?
>Date:Thu, 13 Mar 2008 13:21:35 -0600
>
>On Thu, Mar 13, 2008 at 9:31 AM, 郭劲 <[EMAIL PROTECTED]> wrote:
>> Hi,friends,
>>
>>  I make all the 
>> frequency(timebase-frequency;bus-frequency;clock-frequency)
value
>>  on device tree file equal to zero, I think those frequency will 
>> filled by
u-boot
>>  during bootm, but in fact, the u-boot did not fill any frequency. 
>> after
bootm,
>>  crashed. Why?
>>
>>  Why so many document point out that the zero value will be filled by u-boot?
>
>In most cases it will assuming that your u-boot board port is 
>configured to fill in those values.  You need to make sure that the 
>ft_board_setup function is getting called by bootm and that it fills in 
>those properties.
>
>g.
>
>--
>Grant Likely, B.Sc., P.Eng.
>Secret Lab Technologies Ltd.
> 



-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

Reply via email to