On 3/19/2008, "Wolfgang Denk" <[EMAIL PROTECTED]> wrote:
>In message <[EMAIL PROTECTED]> you wrote:
>>
>> After some further work with these pathces. (I currently work on a
>> SIL3114 driver using them)
>>
>> It seems like there is a "lot" of code duplication in libata.h and the
>> existant ata.h. Thus making it impossible to include both ones. Which i
>> would like to do.
>
>There is no such file like libata.h in mainline U-Boot code. What are
>you referring to?
Sorry if this was not clear. This reply was on the patch for addition of
libata.h and thus i referred to that patch.
>> Pasted below is the modifications i did to do to get it working.
>
>Modifications against which source version exactly?
The original patch and mainline ata.h
>> Could one perhaps merge the differences? Or is there other suggestions on
>> how to solve this?
>
>Please make sure to add your SIgned-off-by line when submitting
>patcehs.
Sure, will do. This version was merely for comments.
>Also, it would be better to split changes of content and pure
>"beautifying" changes into separate patches.
Once again. Ok. will do.
I can resubmit the additions to ata.h, and then maybe Dave could remove
the corresponding parts from his patch?
Best Regards,
/Tor
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
