On Wednesday 26 March 2008, Haavard Skinnemoen wrote: > > Because on PPC4xx for example, all boards are using exactly the same > > eth_init code (for the SoC interfaces). And I don't like adding this code > > to more than 80 boards. > > All 80 boards have exactly the same ethernet interface (i.e. same kind > of PHY, same MII address, etc.)?
Yes, same SoC ethernet interfaces. Currently PHY address etc is configured via config options. > Can't you just add a weak definition of board_eth_init() in the CPU > code then? No. The weak definition is already in net/eth.c. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
