On Wed, Mar 26, 2008 at 10:39 AM, Timur Tabi <[EMAIL PROTECTED]> wrote: > Timur Tabi wrote: > > Add support to the Freescale I2C driver (fsl_i2c.c) for setting and > querying > > the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro, > > but fsl_i2c.c ignores it and uses conservative value when programming the > > I2C bus speed. > > Kim and Jon, > > I tested this patch on 8360, 8568, and 8641. Could you review this patch and > ack/nack? Andy said he'll pick it up if you guys ack it.
Actually, looking at it, it's not really in my domain. It's a driver. I think Wolfgang is in charge of accepting a patch to drivers/. So I'll just Ack. I can pull it in if that's more convenient for Wolfgang, of course. Acked-by: Andy Fleming <[EMAIL PROTECTED]> ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
