In message <[EMAIL PROTECTED]> you wrote: > Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying > the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro, > but fsl_i2c.c ignores it and uses conservative value when programming the > I2C bus speed. > > Signed-off-by: Timur Tabi <[EMAIL PROTECTED]>
Applied with Andy's ACK. I have to admit that I don't like the impact on the memory footprint of the driver. And to make sure I understand this correctly: is it correct to assume that this driver has never been tested with environment in a EEPROM? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] Nothing ever becomes real until it is experienced. - John Keats ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
