On Thursday 27 March 2008, Bartlomiej Sieka wrote: > > ## Booting kernel from Legacy Image at 00200000 ... > > Image Name: Linux-2.6.25-rc7-next-20080327-d > > Created: 2008-03-27 13:51:18 UTC > > Image Type: PowerPC Linux Kernel Image (gzip compressed) > > Data Size: 1288643 Bytes = 1.2 MB > > Load Address: 00000000 > > Entry Point: 00000000 > > Verifying Checksum ... OK > > Uncompressing Kernel Image ... OK > > ERROR: image overwritten - must RESET the board to recover.
<snip> > > Any ideas? > > The image got overwritten during decompression. Try loading the image at > a higher address. Right. This works. But I'm wondering why this is the case, since "old" U-Boot can decompress to this destination successfully. This is quite annoying, since now I have to change all default env variables for this new "legacy" bootm command. So do you have any idea where the difference comes from? Thanks. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
