Hello experts, With U-Boot-1.3.2 and a Freescale MPC8313ERDB, I'm getting this message from bootm
... Booting using the fdt at 0xfc700000 Loading Ramdisk to 07ca1000, end 07f419bf ... OK Loading Device Tree to 007fc000, end 007fefff ... OK WARNING: could not set linux,stdout-path FDT_ERR_NOTFOUND. ERROR: /chosen node create failed - must RESET the board to recover. Resetting the board. U-Boot 1.3.2 (Apr 2 2008 - 10:02:55) MPC83XX Reset Status: Software Hard, External/Internal Soft, External/Internal Hard CPU: e300c3, MPC8313E, Rev: 10 at 333.333 MHz, CSB: 166 MHz ... What do I need to add to DTS file or u-boot environment to make this go? Thanks Bill Cook _____________________________ [EMAIL PROTECTED] Imaging Solutions Group of NY 1387 Fairport Rd., Suite 890 Fairport, NY 14450 http://ISGcameras.com ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
