On Thu, Apr 03, 2008 at 11:56:08AM -0400, Bill Cook wrote: > Hello experts, > > With U-Boot-1.3.2 and a Freescale MPC8313ERDB, > I'm getting this message from bootm > > ... > Booting using the fdt at 0xfc700000 > Loading Ramdisk to 07ca1000, end 07f419bf ... OK > Loading Device Tree to 007fc000, end 007fefff ... OK > WARNING: could not set linux,stdout-path FDT_ERR_NOTFOUND. > ERROR: /chosen node create failed - must RESET the board to recover. > Resetting the board. > > U-Boot 1.3.2 (Apr 2 2008 - 10:02:55) MPC83XX > > Reset Status: Software Hard, External/Internal Soft, External/Internal > Hard > > CPU: e300c3, MPC8313E, Rev: 10 at 333.333 MHz, CSB: 166 MHz > ... > > What do I need to add to DTS file or u-boot environment to make this go?
You probably need serial0, serial1, etc. aliases. See the device trees in head-of-tree Linux. -Scott ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
