On Sun, Mar 30, 2008 at 8:45 AM, David Saada <[EMAIL PROTECTED]> wrote: > > On the MPC83xx & MPC85xx architectures that have QE, add initial data to the > pin configuration table (qe_iop_conf_tab). This is relevant for GPIO pins > defined as output. One can setup a value of -1 to leave the value unchanged. > QE initialization tables in all relevant boards were also replaced. > In addition, add IO pin read & write functions. > This patch also includes commands for reading and writing parallel I/O ports > (pario command). > > Signed-off-by: David Saada <[EMAIL PROTECTED]>
I have managed to apply your patch. But I *still* had to correct several line-wrap errors. I suggest that maybe nabble is not the solution you hope it is. If you wish to continue submitting patches to opensource groups, it'll be a good idea to find a solution that works. Suggestion: test by sending the email to yourself, and see if you can apply the patch to a clean branch. Anyway, I'll wait for Kim's ACK before pushing it up into my dev-1.3.4 branch ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
