On Mon, 14 Apr 2008 12:59:28 -0500 "Andy Fleming" <[EMAIL PROTECTED]> wrote:
> On Sun, Mar 30, 2008 at 8:45 AM, David Saada <[EMAIL PROTECTED]> wrote: > > > > On the MPC83xx & MPC85xx architectures that have QE, add initial data to > > the > > pin configuration table (qe_iop_conf_tab). This is relevant for GPIO pins > > defined as output. One can setup a value of -1 to leave the value > > unchanged. > > QE initialization tables in all relevant boards were also replaced. > > In addition, add IO pin read & write functions. > > This patch also includes commands for reading and writing parallel I/O > > ports > > (pario command). > > > > Signed-off-by: David Saada <[EMAIL PROTECTED]> > > I have managed to apply your patch. But I *still* had to correct > several line-wrap errors. I suggest that maybe nabble is not the > solution you hope it is. If you wish to continue submitting patches > to opensource groups, it'll be a good idea to find a solution that > works. Suggestion: test by sending the email to yourself, and see if > you can apply the patch to a clean branch. > > Anyway, I'll wait for Kim's ACK before pushing it up into my dev-1.3.4 branch see: http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38991 Kim ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
