Hi Andre,
I had a similar problem a while back. Adding the new define: #define CONFIG_HIGH_BATS 1 /* High BATs supported */ To my config solved the problem. /Tor On 6/23/2008, "Andre Schwarz" <[EMAIL PROTECTED]> wrote: >Kim, > >after being back from holiday and pulling the lates u-boot today >(v1.3.3) my MPC8343 based board (mvBL-M7) doesn't work any longer. >Not a single character is put out on serial - yet build is not >complaining about anything and System.map looks quite normal. > >Any ideas what commit can cause this ? > >Am I missing any #defines introduced lately ? > > >regards, >Andre > >MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht: >Amtsgericht Stuttgart, HRB 271090 >Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner > >------------------------------------------------------------------------- >Check out the new SourceForge.net Marketplace. >It's the best place to buy or sell services for >just about anything Open Source. >http://sourceforge.net/services/buy/index.php >_______________________________________________ >U-Boot-Users mailing list >U-Boot-Users@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/u-boot-users > ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
