Andre Schwarz wrote: > Wolfgang, > > as far as I can see on the list you sent the latest patches for the > e1000 driver.
My patches just added some device ids, > My e1000 (82541ER) stopped working on a MPC5200 based board with latest > u-boot. > I have a similar problem on another board ... > > Is your e1000 working properly on the latest u-boot ? Yes, on a MPC8548 board. I have not tested it on the MPC5200. > Do I need any additional defines or environment settings to get it > working again ? > > Obviously it is - again :-[ - my fault or is related to my build system. I think there are some known problems with PCI on boards with a MPC5200 Rev. A processor, e.g. my EEPRO100 card does not work on it. What exactly does not work? Wolfgang. ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
