Wolfgang, as far as I can see on the list you sent the latest patches for the e1000 driver.
My e1000 (82541ER) stopped working on a MPC5200 based board with latest u-boot. I have a similar problem on another board ... Is your e1000 working properly on the latest u-boot ? Do I need any additional defines or environment settings to get it working again ? Obviously it is - again :-[ - my fault or is related to my build system. Any help is welcome. regards, Andre MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
