Hi Tor, Tor Krill <[EMAIL PROTECTED]> writes:
> Add high speed support to USB code. Extracted from Juniper Networks patch. > > I know that the mergewindow is closed but wanted to get feedback on these > patches if possible. Thanks again for fixing this up. AFAIK patches look fine, only two things: - please address the issues pointed out by Michael, especially removal of the "C" macro. - Secondly it would be nice if we could have a short README.ehci or similar which explains what works and what not, and what needs to be done to add further board/HC support. Thank you in advance. Best regards Markus Klotzbücher -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users