On 7/10/2008, "Markus Klotzbücher" <[EMAIL PROTECTED]> wrote:
>Hi Tor,
Hi Markus,
>Tor Krill <[EMAIL PROTECTED]> writes:
>
>> Add high speed support to USB code. Extracted from Juniper Networks patch.
>>
>> I know that the mergewindow is closed but wanted to get feedback on these
>> patches if possible.
>
>Thanks again for fixing this up. AFAIK patches look fine, only two
> things:
>
>- please address the issues pointed out by Michael, especially removal
> of the "C" macro.
>
>- Secondly it would be nice if we could have a short README.ehci or
> similar which explains what works and what not, and what needs to be
> done to add further board/HC support.
>
>Thank you in advance.
Thank you for reviewing. I will try fix things up and resubmit later.
Best Regards,
/Tor
-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
