Jon, are you planning on picking this up? It is mostly an 86xx fix, since only 86xx uses sys_eeprom.c.
Timur Tabi wrote: > Timur Tabi wrote: >> Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. >> The >> NXID format replaces the older CCID format, but it's important to support >> both >> since most boards out there still use the CCID format. This change is in >> preparation for using one file to handle both formats. This will also unify >> EEPROM support for all Freescale 85xx and 86xx boards. >> >> Also update the 86xx board header files to use the standard >> CFG_I2C_EEPROM_ADDR >> instead of ID_EEPROM_ADDR. >> >> Signed-off-by: Timur Tabi <[EMAIL PROTECTED]> >> --- > > Jon, if you have no objections, would you please pick up this patch? > -- Timur Tabi Linux kernel developer at Freescale ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
