In debugging moving the bss outside of the image on 85xx I run into in issue with the SPD code using fsl_i2c before we are running in ram and setup the BSS.
It looks like i2c_wait4bus() [in fsl_i2c.c] calls get_timer(). get_timer implemented in lib_ppc/interrupts.c and uses a global timestamp that exists in the BSS. This seems pretty bad in that we have been just getting a bogus value for timestamp out of flash. Luckily we don't write timestamp until interrupts are enabled and at that point we've relocated to memory. However it seems like fsl_i2c.c should NOT be using get_timer(). Is there another global interface to get relative time that we can just use time base for? - k ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
