Dear "Wolfgang Denk", > > > > > Are "Standalone Applications" supported in the current u-boot (GIT repo)? > > Yes, of course.
I am very happy to hear that. However the manual states "The bootm command is used to start operating system images." and Standalone Applications were supported on u-boot 1.2.0. > > I have tried to bootm a Standalone Application image stored in flash and > I > > get the messages (u-boot then crashes): > > Wrong Image Type for bootm command > > ERROR: can't get kernel image! > > I recommend you start reading the documentation, especally the section > about Standalone Applications. If you refer to chapter 5.12 I had already done so. It has been very useful to download an run standalone applications however there is no reference on how to do it with image files and bootm. > > > In the current one (GIT repo) there is no reference to IH_TYPE_STANDALONE > in > > file common/cmd_bootm.c. Should I look somewhere else? > > Yes. Start looking in the manual. > Thanks for your recommendation I started reading it last july. I have successfully run it now with MPC8248 on two different cards one is COTs and the other house made with three MPC8248 processors. I have also successfully boot linux using the bootm command on both boards. Believe me I really appreciate the work you are doing with u-boot, however I also think you have overlooked my questions. Best Regards, Rodrigo Vilar
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
