Dear Wolfgang Denk, Thanks for your response, I also answer your question below.
> > > > Are "Standalone Applications" supported in the current u-boot (GIT > repo)? > > > > Standalone Applications are no operating systems,m so "bootm" is the > wrong command. > This is the answer I was expecting, bootm does not support Standalone Application Images. My question was not complete, I thought it was not necessary to repeat the mail subject. It should have been: "Are Standalone Application Images supported by bootm in the current u-boot (GIT repo)?" > > That's because Standalone Applications don't use image files and > bootm. They use the "go" command as documented in the manual. > > Is this so difficult? > Probably not so difficult, however "go" on its own does not complete the job I want to do. I want u-boot to start a Standalone Application that is stored in flash without user interaction. In order to do that I have to copy the Standalone Application from flash to ram (it is not XIP) and then run it from ram. I will try to use scripting. In any case it was easier with u-boot 1.2.0 where the bootm command did support Standalone Application Images making the program copy and run all in one go. Best regards, Rodrigo Vilar
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
