Hi! We are running a standalone program via U-boot on our Olimex SAM9-L9260 board with a AT91SAM9260. Included with the board was a CD with U-boot including some board-specific files. We are able to compile and run a Hello-World example as well as starting timers and generating pwm-signals. But we seem unable to generate interrupts, we have tried both from the button on the board (IRQ1) and from a Timer-Counter. We think we are doing everything according to Atmels datacheet for AT91SAM9260 but it's just not working.
We are kind of lost and not sure what's wrong or what we are supposed to ask, but we have made some obeservations. We have been searching through U-boot config-, header-, source- and makefiles. And found that in our sam9l9260.h it says: #undef CONFIG_USE_IRQ Does this mean we are not using interrupts? >From what we gather U-boot configures the processor-core before our code starts, is that something we want to look into? If you are not familiar with this board it is supposed to be very similar to the AT91SAM9260EK. Please help us figure this one out! Regards Björn Saläng & Andreas Gising
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
