Thank you for your help! This task might be to hard for us, so we will try to manage without interrupts.
Regards Björn & Andreas 2008/10/1 Wolfgang Denk <[EMAIL PROTECTED]> > Dear "=?ISO-8859-1?Q?Bj=F6rn_Sal=E4ng?=", > > In message <[EMAIL PROTECTED]> > you wrote: > > > > Hi again! Thank You Wolfgang for spending time on us. > > YOu are welcome - but please keep the list on Cc: ! > > > So you are proposing we should rebuild U-boot and upload it on our board? > To > > No - that will probably not be sufficient. You have to add the code > first that implements interrupt support, it seems. > > > much about it. We hoped we only needed to change the binary file of our > > standalone program compiled on our host computer. > > Change U-boot or standalone binary? > > Extend the U-Boot code to add interrupt support, then rebuild and > install the new U-Boot. > > Best regards, > > Wolfgang Denk > > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] > "There are three principal ways to lose money: wine, women, and engi- > neers. While the first two are more pleasant, the third is by far the > more certain." - Baron Rothschild, ca. 1800 >
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
