I believe these code was copied from 74xx family, but for
86xx, it is unused.
Signed-off-by: Dave Liu <[EMAIL PROTECTED]>
---
cpu/mpc86xx/start.S | 14 --------------
1 files changed, 0 insertions(+), 14 deletions(-)
diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
index 30e6047..ab672d1 100644
--- a/cpu/mpc86xx/start.S
+++ b/cpu/mpc86xx/start.S
@@ -647,16 +647,6 @@ relocate_code:
/*
* Now relocate code
*/
-#ifdef CONFIG_ECC
- bl board_relocate_rom
- sync
- mr r3, r10 /* Destination Address */
- lis r4, [EMAIL PROTECTED] /* Source Address */
- ori r4, r4, [EMAIL PROTECTED]
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size
*/
-#else
cmplw cr1,r3,r4
addi r0,r5,3
srwi. r0,r0,2
@@ -678,7 +668,6 @@ relocate_code:
3: lwzu r0,-4(r8)
stwu r0,-4(r7)
bdnz 3b
-#endif
/*
* Now flush the cache: note that we must start from a cache aligned
* address. Otherwise we might miss one cache line.
@@ -711,9 +700,6 @@ relocate_code:
blr
in_ram:
-#ifdef CONFIG_ECC
- bl board_init_ecc
-#endif
/*
* Relocation Function, r14 point to got2+0x8000
*
--
1.5.4
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
