In order to later allow for a physical relocation of the
flash, setup_bats, which sets up the final BAT mapping
for the board, needs to happen *after* init_laws().
Otherwise, there will be no window programmed for the flash
at the new physical location at the point when we change
the mmu translation.
Signed-off-by: Becky Bruce <[EMAIL PROTECTED]>
---
cpu/mpc86xx/cpu_init.c | 4 ++++
cpu/mpc86xx/start.S | 5 -----
2 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/cpu/mpc86xx/cpu_init.c b/cpu/mpc86xx/cpu_init.c
index 06f179c..a7e6036 100644
--- a/cpu/mpc86xx/cpu_init.c
+++ b/cpu/mpc86xx/cpu_init.c
@@ -33,6 +33,8 @@
#include <asm/fsl_law.h>
#include "mp.h"
+void setup_bats(void);
+
DECLARE_GLOBAL_DATA_PTR;
/*
@@ -57,6 +59,8 @@ void cpu_init_f(void)
init_laws();
#endif
+ setup_bats();
+
/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
* addresses - these have to be modified later when FLASH size
* has been determined
diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
index 48f8c5a..0d30e91 100644
--- a/cpu/mpc86xx/start.S
+++ b/cpu/mpc86xx/start.S
@@ -272,11 +272,6 @@ in_flash:
GET_GOT /* initialize GOT access */
- /* setup the rest of the bats */
- bl setup_bats
- sync
-
-
/* run low-level CPU init code (from Flash) */
bl cpu_init_f
sync
--
1.5.5.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
